1. DL manuals
  2. Magnum
  3. Bicycle
  4. PEAK
  5. User Manual

Magnum PEAK User Manual

Summary of PEAK

  • Page 1

    Magnum peak user ​​guide please ​​read​​before​​use! Www.Magnumbikes.Com.

  • Page 2

    Foreword these ​ ​operating​ ​instructions​ ​must​ ​be​ ​carefully​ ​read​ ​in​ ​order​ ​to​ ​quickly​ ​familiarize​ ​yourself​ ​with​ ​your​ ​bicycle.​ ​the​ ​knowledgeable​ ​treatment, regular ​ ​maintenance,​ ​and​ ​care​ ​of​ ​the​ ​bicycle​ ​is​ ​essential​ ​for​ ​its​ ​preservation​ ​and​ ​saf...

  • Page 3

    Table ​​of​​contents service function ​ ​and​ ​operation​ ​of handlebar ​ ​components ​ ​4 mounting ​ ​instructions​ ​for​ ​handlebars ​ ​5 pedal ​ ​installation ​ ​7 seating ​ ​position ​ ​8 adjust ​ ​the​ ​seat​ ​height ​ ​9 adjust ​ ​the​ ​saddle ​ ​9 suspension ​ ​fork​ ​lock​ ​out ​ ​9 safety ​...

  • Page 4

    Use right ​​side​​view ​​ ​1.​ ​quick​ ​release​ ​lever​ ​seat​ ​height 7. ​ ​hydraulic​ ​disc​ ​brake​ ​front 2. ​ ​controller 8. ​ ​pedals 3. ​ ​battery​ ​(lockable) 9. ​ ​derailleur 4. ​ ​display 10. ​ ​electric​ ​motor 5. ​ ​handlebar​ ​shifters​ ​and​ ​brake​ ​levers 11. ​ ​hydraulic​ ​disc​ ​b...

  • Page 5

    Use mounting ​​instructions​​for​​handlebars threadless ​​headset​​assembly 1. ​ ​loosen​ ​the​ ​top​ ​screw​ ​and​ ​plastic​ ​part. 2. ​ ​take​ ​off​ ​the​ ​neco​ ​spacer 5.

  • Page 6

    3. ​ ​install​ ​the​ ​handlebars​ ​as​ ​shown,​ ​and​ ​secure​ ​with​ ​the​ ​top​ ​cap.​ ​do​ ​not​ ​overtighten​ ​bolt​ ​on​ ​top​ ​cap;​ ​fork​ ​should​ ​rotate​ ​freely​ ​but​ ​there​ ​should be ​ ​no​ ​extra​ ​play. 4. ​ ​adjust​ ​the​ ​handlebar​ ​to​ ​the​ ​position​ ​of​ ​the​ ​tire​ ​and​ ​t...

  • Page 7

    Use pedal ​​installation warning do ​​not​​tighten​​the​​pedals​​by​​hand,​​use​​a​​suitable​​wrench. - ​ ​identify​ ​your​ ​pedal:​ ​check​ ​the​ ​letter​ ​on​ ​the​ ​pedal:​ ​"l"​ ​or​ ​"r". - ​ ​the​ ​pedal​ ​marked​ ​"r"​ ​is​ ​for​ ​the​ ​right.​ ​turn​ ​the​ ​wrench​ ​handle​ ​clockwise. - ​ ​...

  • Page 8

    Use seat ​​position to ensure comfortable, fatigue-free and safe riding, the saddle and handlebar height must be adjusted to the body size. The saddle height is correct when the foot is resting on the pedal at the lowest position while the leg is not fully extended. The tips of the toes must still t...

  • Page 9

    Use adjust ​​the​​seat​​height warning a ​​not​​fully​​closed​​quick​​release​​lever​​can​​open​​again.​​this​​allows​​the​​saddle​​to​​move​​down​​during​​the​​ride.​​this​​can​​lead​​to severe ​​falls.​​the​​turning​​of​​the​​quick​​release​​lever​​must​​be​​so​​difficult​​that​​the​​handlebars​​a...

  • Page 10

    Use important ​​safety​​precautions​​for​​the​​charger before ​ ​using​ ​the​ ​charger,​ ​please​ ​read​ ​these​ ​safety​ ​instructions. Warning protect your charger from children. To prevent injury, recharge only lithium-ion batteries. Other battery types can explode when charged. This can lead ​ ​...

  • Page 11

    Use charger ​​functions charge ​​cycle​​and​​led​​indicators​​for​​lithium-ion​​battery led status green battery​ ​not​ ​connected​ ​yet red charging green charging​ ​completed this ​ ​charger​ ​is​ ​suitable​ ​for​ ​li-ion​ ​batteries. The led (light-emitting diode 1) on the charger keeps you const...

  • Page 12

    Service warning the ​​batteries​​of​​the​​bicycle​​and​​the​​charger​​are​​matched.​​never​​charge​​the​​batteries​​with​​another​​charger. - ​ ​protect​ ​the​ ​battery​ ​from​ ​theft​ ​and​ ​moisture. - before you connect the charger to the outlet, please check that the voltage of your power supply...

  • Page 13

    Use handling ​​of​​battery​​and​​charger in ​​order​​to​​achieve​​the​​longest​​possible​​battery​​life,​​the​​following​​notes​​should​​be​​observed: - ​ ​the​ ​charger​ ​is​ ​not​ ​activated​ ​when​ ​the​ ​battery​ ​temperature​ ​is​ ​below​ ​+​ ​32​ ​°​ ​f​ ​and​ ​above​ ​+​ ​140​ ​°​ ​f.​ ​there...

  • Page 14

    Use recharging ​​the​​battery note the ​ ​battery​ ​(1)​ ​can​ ​be​ ​removed​ ​from​ ​the​ ​e-bike. The ​ ​battery​ ​is​ ​secured​ ​with​ ​a​ ​lock​ ​(2). - ​ ​unlock​ ​and​ ​pull​ ​out​ ​the​ ​battery. Important ​​note! The ​ ​new​ ​48v​ ​battery​ ​has​ ​in​ ​the​ ​direction​ ​of​ ​travel​ ​on​ ​th...

  • Page 15

    Remove ​​the​​battery insert ​​the​​battery battery ​​charge​​status note the ​ ​battery​ ​(1)​ ​is​ ​secured​ ​with​ ​a​ ​lock. - ​ ​unlock​ ​and​ ​remove​ ​the​ ​battery​ ​(1). - ​ ​push​ ​the​ ​battery​ ​(1)​ ​into​ ​the​ ​frame​ ​as​ ​far​ ​as​ ​it​ ​will​ ​go. - ​ ​remove​ ​the​ ​key​ ​in​ ​the...

  • Page 16

    Use riding ​​instructions note the ​ ​battery​ ​is​ ​secured​ ​in​ ​the​ ​frame​ ​with​ ​a​ ​lock. Before ​ ​starting​ ​the​ ​ride,​ ​check​ ​whether​ ​the​ ​battery​ ​is​ ​correctly​ ​inserted​ ​into​ ​the​ ​frame​ ​and​ ​pull​ ​the​ ​key​ ​out. Otherwise, ​ ​the​ ​key​ ​can​ ​break​ ​in​ ​case​ ​o...

  • Page 17

    Use brakes the ​ ​brakes​ ​of​ ​the​ ​front​ ​and​ ​rear​ ​wheels​ ​can​ ​be​ ​operated​ ​independently​ ​of​ ​each​ ​other. When ​ ​stopping​ ​or​ ​reducing​ ​the​ ​speed,​ ​operate​ ​both​ ​brakes​ ​at​ ​the​ ​same​ ​time. Depending ​ ​on​ ​the​ ​model​ ​chosen,​ ​the​ ​e-bike​ ​is​ ​equipped​ ​wi...

  • Page 18

    Warning when ​​unfolding​​the​​kickstand​​(1),​​always​​make​​sure​​that​​the​​stand​​is​​stable​​and​​firm,​​so​​as​​to​​prevent​​the​​bike​​from​​falling​​over. - ​ ​pull​ ​off​ ​the​ ​key​ ​(2)​ . Display for ​ ​instructions​ ​and​ ​information​ ​on​ ​the​ ​magnum​ ​peak​ ​display,​ ​please​ ​dow...

  • Page 19

    Riding safety ​​instructions traffic ​​safety an e-bike must be equipped with two mutually independent, functional brakes, a clearly audible bell, headlights, tail lamps, reflective pedals, reflectors ​ ​on​ ​wheels​ ​as​ ​well​ ​as​ ​front​ ​and​ ​rear​ ​reflectors. The ​ ​e-bike​ ​is​ ​only​ ​suit...

  • Page 20

    Riding safety ​​instructions is ​​the​​e-bike​​fit​​to​​ride? Perform ​ ​the​ ​following​ ​checks​ ​at​ ​regular​ ​intervals: - is ​ ​tire​ ​tire​ ​pressure​ ​correct?​ ​(see​ ​chapter​ ​"technical​ ​data") - are ​ ​the​ ​steering​ ​bearings​ ​and​ ​the​ ​pedal​ ​cranks​ ​correct?​ ​(see​ ​chapter​ ...

  • Page 21

    Driving remove ​​front​​wheel​​for​​transport extend: - open ​ ​the​ ​quick-release​ ​lever​ ​(1)​ ​and​ ​release​ ​the​ ​axle​ ​nut​ ​(2)​ ​several​ ​turns. - remove ​ ​the​ ​front​ ​wheel​ ​(3)​ ​from​ ​the​ ​fork. Warn i ng a not fully closed quick release lever can open again. This can lead to s...

  • Page 22

    Maintenance bicycle ​​care​​/​​care​​products note regular ​ ​and​ ​expert​ ​care​ ​is​ ​essential​ ​for​ ​the​ ​maintenance​ ​of​ ​the​ ​bicycle​ ​and​ ​is​ ​one​ ​of​ ​the​ ​prerequisites​ ​for​ ​the​ ​recognition​ ​of​ ​warranty​ ​claims. Corrosion ​ ​caused​ ​by​ ​lack​ ​of​ ​care​ ​or​ ​by​ ​wi...

  • Page 23

    Maintenance winter ​​operation​​and​​corrosion​​protection note in the interests of environmental protection, we ask you to use use products sparingly and to use only those which are marked as environmentally friendly. ​ ​if​ ​the​ ​bike​ ​is​ ​used​ ​during​ ​the​ ​winter​ ​months,​ ​considerable​ ...

  • Page 24

    Maintenance other ​​components dispose ​ ​of​ ​the​ ​components​ ​in​ ​accordance​ ​with​ ​the​ ​environmental​ ​regulations​ ​applicable​ ​in​ ​your​ ​country. Electrical ​ ​waste​ ​must​ ​not​ ​be​ ​disposed​ ​of​ ​together​ ​with​ ​household​ ​waste.​ ​contact​ ​your​ ​local​ ​authority​ ​or​ ​th...

  • Page 25

    Maintenance h ​​=​​maintenance​​by​​the​​dealer f ​​=​​test​​by​​the​​rider work ​​to​​be​​done before ​​riding monthly yearly if ​​necessary check ​​all​​bolts​​and​​nuts,​​which​​are​​important​​for​​driving​​safety​​and​​function,​​if​​necessary. Axle ​​nut​​-​​steering​​bearing​​-​​handlebar​​-​...

  • Page 26

    Maintenance cranks the ​ ​cranks​ ​(1)​ ​can​ ​be​ ​loosened​ ​during​ ​riding.​ ​regularly​ ​check​ ​that​ ​the​ ​cranks​ ​are​ ​tight. If ​ ​you​ ​move​ ​the​ ​cranks​ ​firmly​ ​sideways,​ ​no​ ​play​ ​can​ ​be​ ​felt.​ ​also​ ​the​ ​bottom​ ​bracket​ ​(2)​ ​must​ ​not​ ​have​ ​any​ ​play​ ​and​ ​...

  • Page 27

    Note the ​ ​front​ ​fork​ ​(4)​ ​must​ ​not​ ​become​ ​stuck​ ​in​ ​the​ ​steering​ ​position​ ​and​ ​must​ ​swing​ ​easily​ ​in​ ​both​ ​directions. Danger the ​​adjustment​​must​​be​​made​​by​​the​​dealer. 27.

  • Page 28

    Maintenance spokes a ​ ​tight​ ​fit​ ​of​ ​the​ ​spokes​ ​(1)​ ​is​ ​important​ ​for​ ​the​ ​smooth​ ​running​ ​of​ ​the​ ​wheels.​ ​spokes​ ​loosen​ ​over​ ​time. The ​ ​broken​ ​spoke​ ​and​ ​the​ ​spoke​ ​opposite​ ​the​ ​broken​ ​spoke​ ​must​ ​be​ ​replaced​ ​immediately​ ​and​ ​the​ ​wheel​ ​m...

  • Page 29

    Technical ​ ​specifications components peak ​ ​27.5”​ ​48v motor r2,​ ​48v​ ​500w,​ ​20​ ​mph,​ ​rear​ ​motor battery​ ​pack i6​ ​48v​ ​14ah​ ​panasonic​ ​cells,​ ​with​ ​usb​ ​connection display c7bbt​ ​lcd​ ​display fork suntour,​ ​xcm-hlo-27.5,​ ​with​ ​preload,​ ​hydraulic lockout brake​ ​lever ...

  • Page 30

    Warranty wear ​​parts​​list wear wear ​​limit tires,​ ​cables,​ ​rims depending​ ​on​ ​riding​ ​conditions,​ ​load,​ ​and​ ​air​ ​pressure​ ​the​ ​wear​ ​limit​ ​can​ ​be reached​ ​at​ ​300​ ​miles​ ​or​ ​earlier. Wheels,​ ​spokes,​ ​hubs depending​ ​on​ ​riding​ ​conditions,​ ​load,​ ​and​ ​air​ ​p...

  • Page 31

    Warranty warranty ​​conditions we ​ ​at​ ​magnum​ ​bikes​ ​usa​ ​offer​ ​a​ ​warranty​ ​of • ​ ​1​ ​year​ ​on​ ​the​ ​frame​ ​(e-bikes) • 1 year on all electronic components including battery on the new product advertised with the guarantee promise. The period for the calculation of the warranty per...