Magnus PV Series Owner's Manual

Summary of PV Series

  • Page 1

    • never set up or pull down a tripod while a camera is mounted • do not move the tripod or adjust the legs while a camera is mounted • do not exceed the maximum weight capacity of the tripod • never leave a camera unattended on the tripod • the camera should be securely fastened to the quick- releas...

  • Page 2

    • never set up or pull down a tripod while a camera is mounted • do not move the tripod or adjust the legs while a camera is mounted • do not exceed the maximum weight capacity of the tripod • never leave a camera unattended on the tripod • the camera should be securely fastened to the quick- releas...

  • Page 3

    3 to change the camera orientation from horizontal to vertical position, loosen the platform locking knob by rotating it counterclockwise. Rotate the platform 90°, and then rotate the platform locking knob clockwise to lock the new position (fig. I) 3 make sure the screwhead handle is flat against t...

  • Page 4

    3 to change the camera orientation from horizontal to vertical position, loosen the platform locking knob by rotating it counterclockwise. Rotate the platform 90°, and then rotate the platform locking knob clockwise to lock the new position (fig. I) 3 make sure the screwhead handle is flat against t...

  • Page 5

    3 to change the camera orientation from horizontal to vertical position, loosen the platform locking knob by rotating it counterclockwise. Rotate the platform 90°, and then rotate the platform locking knob clockwise to lock the new position (fig. I) 3 make sure the screwhead handle is flat against t...

  • Page 6

    • never set up or pull down a tripod while a camera is mounted • do not move the tripod or adjust the legs while a camera is mounted • do not exceed the maximum weight capacity of the tripod • never leave a camera unattended on the tripod • the camera should be securely fastened to the quick- releas...