Owner’s manual zoom controller vc-20-se.
2 thank you for choosing magnus. Thank you for choosing the magnus vc-20-se zoom controller. This lightweight, compact eng device has a built-in 8-pin eng cable that gives you control of record and zoom functions. The vc-20-se is compatible with a variety of canon and fujinon lenses. A built-in clam...
3 controller components record/return function selector slider switch built-in 8-pin eng cable rec/ret button zoom control rocker switch clamp clamp knob selector slider switch .Image is for illustration purposes only.
4 mount the controller to the pan handle 1 if you’re using the built-in eng cable, move the selector slider to the correct position—“c” for canon or “f” for fujinon. 2 if you’re using the optional magnus accessory cable ac-esx for eng to sony ex, carefully align the pins and slide the metallic end o...
5 3 loosen the clamp using the clamp knob. 4 place the controller on the pan handle, with the handle centered in the clamp’s v shape. 5 hand-tighten the clamp securely..
6 attach the eng control to the lens 1 be certain that the camcorder is turned off. Note: when plugging or unplugging the control cable, always hold the plug firmly—don’t pull the cable. 2 move the rec/ret selector slider to rec. 3 carefully insert the control cable plug into the lens’s eng socket..
7 operation 1 press the red rec/ret button to begin recording; to stop recording, press the red button again. 2 use the variable-speed zoom rocker switch to control the zoom function..
8 3 press the side of the switch marked “w” to zoom out to a more wide-angle view; press the “t” side to zoom into a more telephoto view. 4 pressing the switch with more force increases the speed of the zoom; pressing with less force decreases the speed of the zoom..
9 5 you can stop recording to check your footage. After reviewing your footage, move the rec/ret selector slider to ret. Push the red rec/ret button. This will return the tape to the point at which you stopped recording and prevent a break in the time code. 6 after the tape returns to the point at w...
10 • please read and follow these instructions, and keep this manual in a safe place. • make sure the item is intact and that there are no missing parts. • keep this unit away from water and any flammable gases or liquids. • do not attempt to disassemble or repair the equipment—doing so will void th...
11 magnus a gradus group brand tm one (1) year limited warranty magnus provides a limited warranty to the original purchaser that this product is free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days ...
Www.Magnustripods.Com © copyright 2013 gradus group llc.
