- DL manuals
- Magtek
- Card Reader
- 99875388-9
- Technical Reference Manual
Magtek 99875388-9 Technical Reference Manual
Summary of 99875388-9
Page 1
Usb magnesafe v5 swipe and insert reader technical reference manual part number 99875388-9 june 2012 registered to iso 9001:2008 1710 apollo court seal beach, ca 90740 phone: (562) 546-6400 fax: (562) 546-6301 technical support: (651) 415-6800 www.Magtek.Com.
Page 2
Ii copyright © 2001-2012 magtek ® , inc. Printed in the united states of america information in this document is subject to change without notice. No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express wri...
Page 3
Iii limited warranty magtek warrants that the products sold pursuant to this agreement will perform in accordance with magtek’s published specifications. This warranty shall be provided only for a period of one year from the date of the shipment of the product from magtek (the “warranty period”). Th...
Page 4
Iv fcc warning statement this equipment has been tested and was found to comply with the limits for a class b digital device pursuant to part 15 of fcc rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential envir...
Page 5
V table of contents section 1. Features and specifications .................................................................... 1 features ............................................................................................................................................... 2 hardware config...
Page 6
Vi.
Page 7
Vii figure 1-1. Usb magnesafe swipe reader – full size figure 1-2. Usb magnesafe swipe reader – mini figure 1-3. Usb magnesafe swipe readers – p55 and p90
Page 8
Viii figure 1-4. Usb magnesafe insert reader without bezel figure 1-5. Usb magnesafe p-series insert reader with extended bezel.
Page 9
1 section 1. Features and specifications the usb (universal serial bus) readers are compact magnetic stripe card readers that conform to iso standards. In addition to reading multiple tracks of data from a card, the readers also include magneprint technology. The magneprint data will be included wit...
Page 10
Usb magnesafe v5 swipe and insert reader 2 features major features of the readers are as follows: • wired model and wireless model dongle powered through the usb – no external power supply required • wireless model reader is powered by a rechargeable battery; recharging can be provided via a standar...
Page 11
Section 1. Features and specifications 3 hardware configuration the hardware configuration is as follows: part number tracks style connector cable 21063015 1, 2, 3 insert (intellistripe 65 style) no bezel, head right usb mini-b optional 21063016 1, 2, 3 insert (intellistripe 65 style) international ...
Page 12
Usb magnesafe v5 swipe and insert reader 4 part number tracks style connector cable 21073054 1, 2, 3 black 6’ mini n/a 6’ usb-a 21073057 1,2 black 6’ mini n/a 6’ usb-a 21073063 1, 2, 3 gray 6’ full n/a 6’ usb-a accessories the accessories are as follows: part number description 21041495 usb-a to 5-p...
Page 13
Section 1. Features and specifications 5 specifications table 1-2 lists the specifications for the usb magnesafe readers. Table 1-2. Specifications reference standards iso 7810 and iso 7811/ aamva* power input 5v from usb bus recording method two-frequency coherent phase (f2f) message format ascii c...
Page 14
Usb magnesafe v5 swipe and insert reader 6 figure 1-2. Dimensions for mini reader figure 1-3. Dimensions for full size reader.
Page 15: Section 2. Installation
7 section 2. Installation this section describes the cable connection, the windows plug and play setup, and the physical mounting of the unit. Usb connection connect the usb cable or dongle for the wireless model to a usb port on the host. The reader, led indicator, and pin numbers for the 4-pin con...
Page 16
Usb magnesafe v5 swipe and insert reader 8 windows plug and play setup on hosts with the windows operating system, the first time the reader is plugged into a specific usb port, windows will pop up a dialog box, which will guide you through the process of installing a device driver for the reader. A...
Page 17
Section 2. Installation 9 figure 2-2. Mounting hole dimensions for full size reader figure 2-3. Mounting hole dimensions for mini reader 2. Ensure the reader is positioned on a flat, accessible surface with at least 4 inches clearance on either end for room to swipe a card. If fastening tape is to b...
Page 18
Usb magnesafe v5 swipe and insert reader 10
Page 19: Section 3. Operation
11 section 3. Operation user switch only the wireless reader model includes a user switch. This section only applies to the wireless model. The user switch, or power switch, is located on the side of the reader. Pressing the user switch when the reader is off will turn the reader on. The reader will...
Page 20
Usb magnesafe v5 swipe and insert reader 12 for the wireless reader, after a card swipe but prior to indicating the status of decoding the card data when data should be transmitted wirelessly, if the the reader is out of range the green led will blink rapidly (~10 times a second) until the reader is...
Page 21
Section 3. Operation 13 example 1 – power up followed by authentication and good swipe: 1. Reader powers up (state = waitactauth:pu). This is typically right after the usb connection becomes available to the application. Application should send the get reader state command to discover the current st...
Page 22
Usb magnesafe v5 swipe and insert reader 14 command (state => waitactauth:toauth). Host doesn’t know because the reader can/does not send any message. 4. Host finally sends activation challenge reply command (state remains waitactauth:toauth). Reader responds with rc=0x07 inferring the previous tran...
Page 23
15 appendix a. Insert reader drawings this section contains the drawings showing the mounting dimensions for the insert reader models. The following drawings are included: 21063015 mounting specifications for 21063015 21063018 mounting specifications for 21063018 and 21063019 21063020 mounting speci...
Page 24
Usb magnesafe v5 swipe and insert reader ___________________________________________________________________________________________ 16 figure a-1. Mounting specification for 21063015.
Page 25
Appendix a. Drawings 17 figure a-2. Mounting specification for 21063018 and 21063019.
Page 26
Usb magnesafe v5 swipe and insert reader 18 figure a-3. Mounting specification for 21063020 and 21063021.
Page 27
Appendix a. Drawings 19 figure a-4. Specification for 21063022.
Page 28
Usb magnesafe v5 swipe and insert reader 20 figure a-5. Specification for 21063023.