Magnesafe oem usb reader technical reference manual part number d99875494-51 july 2015 registered to iso 9001:2008 1710 apollo court seal beach, ca 90740 phone: (562) 546-6400 fax: (562) 546-6301 technical support: (651) 415-6800 www.Magtek.Com.
Ii copyright © 2001-2014 magtek ® , inc. Printed in the united states of america information in this document is subject to change without notice. No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express wri...
Iii limited warranty magtek warrants that the products sold pursuant to this agreement will perform in accordance with magtek’s published specifications. This warranty shall be provided only for a period of one year from the date of the shipment of the product from magtek (the “warranty period”). Th...
Iv fcc warning statement this equipment has been tested and was found to comply with the limits for a class b digital device pursuant to part 15 of fcc rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential envir...
V table of contents section 1. Features and specifications .................................................................... 1 features ............................................................................................................................................... 2 hardware config...
Vi.
1 section 1. Features and specifications the magnesafe readers are compact magnetic stripe card readers that conform to iso standards. In addition to reading multiple tracks of data from a card, the readers also include magneprint technology. The magneprint data will be included with the track data ...
Oem magnesafe swipe reader 2 features major features of the readers are as follows: • hardware compatible with a pc or any computer or terminal having a usb interface • bi-directional card reading • reads encoded data that meets ansi/iso/aamva standards • reads up to three tracks of card data • prov...
Section 1. Features and specifications 3 reference documents magtek communication reference manual for usb magnesafe v5 readers (99875475) axelson, jan. Usb complete, everything you need to develop custom usb peripherals, 1999. Lakeview research, 2209 winnebago st., madison wi 53704, 396pp., http://...
Oem magnesafe swipe reader 4.
5 section 2. Installation this section describes the connections for usb and the led. Usb connection pin numbers and signal descriptions for the usb connector are listed in table 2-1. The connector on the cable is molex 501568-0507. One possible mating connector is molex 501330-0500. Table 2-1. 5-pi...
Oem magnesafe swipe reader 6.
7 section 3. Operation led indicator the led indicator, if equipped, will be either off, red, green, or amber. When the reader is not powered, the led will be off. When the reader is first plugged in, the led will be solid amber. After the reader is plugged in, the host will try to enumerate the rea...
Oem magnesafe swipe reader 8.
9 appendix a. Drawings figure a-1. Magnesafe 3 track module with 0.220” base - usb flex.
Oem magnesafe swipe reader 10 figure a-2. Magnesafe 3 track reader 90mm body - usb flex.
Appendix a. Drawings 11 figure a-3. Magnesafe 3 track reader 90mm slim rail - usb flex.
Oem magnesafe swipe reader 12 figure a-4. Magnesafe 3 track head- usb.
