Mahlkonig K30 Competition Operating Instructions Manual - page 13
8.3 Cleaning the Grinder Casing
8.3.1
Clean the outside of the casing from time to time using a
damp cloth.
8.3.2
Observe the safety instructions under 1.2!
Be careful of sharp edges when cleaning.
There is a risk of injury!
8.4 Cleaning of the Grinding Mechanism
Always pull the main plug from the socket
before carrying out maintenance or cleaning
work on the device!
Do not let any foreign objects fall into the
grinding
mechanism!
8.4.1
Close the slide on the bean container. Remove the lock
screw Item 2. Turn the base of the bean container to the right so
that the bayonet releases the bean container. Pull the bean
container off upwards.
8.4.2
Remove beans out of the filler neck.
Remove the lock screw
Item 4 and
turn the grind adjustment lid to the right. The sliding
detent automatically engages in the coarsest setting.
8.4.3
Remove the grind adjustment lid Item 5.
8.4.4
Now you can carefully vacuum out the grinder housing.
Please do not change any grinder settings!
8.4.5
During the reassembly please make sure that the grind
adjustment lid is placed in a way that the 3 engaging cones fit into
the toothing of the grinding disc support. The screw of the grind
adjustment has to be placed over the cut-out in the intermediate
ring.
8.4.6
Lower the g
rind adjustment lid onto the intermediate ring
and turn to the left.
Fasten the lock screw Item 4.
8.4.7
Carry out a grinding and coffee making test. Readjust the
grinding setting if necessary.
9. Removal of the Integrated Grinder
Always pull the main plug from the socket
before carrying out maintenance or cleaning
work on the device!
Observe the safety instructions under 1.2!
Do not let any foreign objects fall into the