MainStation MS-D1 User manual - page 2
®
D
O
C
K
IN
G
S
T
A
T
IO
N
Rev. B
Specifications:
Dimensions (WxHxD):
72mm x 28.5mm x 68mm
(2-7/8" x 1-1/4" x 2-5/8")
Net Weight (Dock Only): 156g (5.5oz.)
Connections: 3.5mm 4-Conductor Phone Plug & Mini-B USB
Audio Output (0dB Reference): 830mVrms
Video Output: Composite NTSC 1Vp-p, 75 ohm
Power Supply
Input power: AC 100-240V (50/60Hz) O.5A
Output power: 5Vdc, 2.1A max
Warranty:
1 Year Limited Warranty
POWER
REPEAT
MENU
SELECT
IR Remote Control
< Shuffle Mode
< Repeat Mode
< Next (short press) / Fast
<
Forward (long press)
< Move up in Playlist
< Move down in Playlist
Power on / off >
Play / Pause >
Previous or skip to >
beginning (short press)
>
Fast backward (long press)
>
Return to Menu and toggle >
>
Select to Play>
Connection to an Audio / Video System
The»MS-D1»dock»can»be»connected»to»an»audio/video»system»or»to»a»computer.»»To»connect»the»dock»to»an»audio»video»system,»
use»the»supplied»AV»cable.»»The»Yellow»RCA»connector»is»the»Composite»Video»Output»from»the»dock.»»The»Red»RCA»connector»is»
the»Right»Audio»Output»channel.»»The»White»RCA»connector»is»the»Left»Audio»Output»channel.»»These»three»connectors»must»be»
connected»to»the»corresponding»Inputs»of»the»AV»system,»which»will»likely»have»the»same»corresponding»colors.
If»the»playback»system»does»not»have»RCA»style»inputs»then»you»will»need»to»supply»the»appropriate»cable»or»adapters.»»»The»
MS-D1»will»accept»a»3.5mm»3»or»4-conductor»male»phone»plug.»»A»cable»with»a»3-conductor»plug»allows»for»stereo»audio»output»
only»(no»video).»»A»4-conductor»plug»is»necessary»to»output»both»stereo»audio»and»video.»»
*Note:»3.5mm»plugs»are»also»referred»to»as»1/8»inch.»»
The»MS-D1»can»also»be»plugged»into»the»USB»port»of»many»AV»receivers»that»offer»iPod»connectivity»and»support.»»When»
connected»in»this»way,»the»MS-D1»will»receive»power»from»the»AV»receiver»and»the»receiver»will»see»the»iPod»as»if»it»were»
connected»using»a»conventional»“Sync”»cable.»»
The»USB»connector»on»the»back»of»the»MS-D1»provides»the»power»for»charging»the»docked»device.»»It»is»also»the»connector»used»
to»“Sync”»files»with»a»computer.»»To»charge»the»docked»device»while»it»is»connected»to»an»AV»system,»connect»the»USB»cable»
between»the»dock»and»the»supplied»AC»adapter»and»plug»the»adapter»into»an»active»AC»outlet.»»The»supplied»AC»adapter»will»
operate»from»100»to»240VAC»and»can»provide»up»to»2.1»amps»of»current»for»charging»iPads»or»any»smaller»device.
The»MS-D1»dock»can»be»used»without»external»power.»»When»no»external»power»is»present»the»iPod,»iPhone,»or»iPad»will»operate»
from»its»internal»battery.»»The»IR»controls»of»the»MS-D1»will»function»normally»in»this»arrangement.»»
Connection to a Computer
Only»the»USB»cable»is»required»for»
connection»to»a»computer.»»The»USB»
connection»provides»both»the»power»for»
charging»and»for»the»transfer»of»files»
(synching).»»Connection»to»a»computer»
must»be»through»a»USB»2.0»or»3.0»port.»»
File»synchronization»and»playback»can»
be»performed»using»Apple»iTunes®.»»
Some»files»can»be»accessed»through»
the»computer’s»file»system.»»
Remote Control Operation
*Remote functions are not
available for some devices.
iPad, iPhone and iPod are trademarks of Apple Inc., registered in the U.S. and other countries
The Bluetooth
®
word mark and logos are registered trademarks of Bluetooth SIG, Inc.
Battery Type:
CR2025
(Menu Navigation Functions
not available with iPad)
“Made for iPod,” “Made for iPhone,” and “Made for iPad” mean that an electronic accessory
has been designed to connect specifically to iPod, iPhone, or iPad, respectively, and has been
certified by the developer to meet Apple performance standards. Apple is not responsible for
the operation of this device or its compliance with safety and regulatory standards. Please
note that the use of this accessory with iPod, iPhone, or iPad may affect wireless performance.