1. DL manuals
  2. Maipu
  3. Network Router
  4. MP2900-04-AC
  5. Installation Manual

Maipu MP2900-04-AC Installation Manual

Manual is about: MP2900 Series Router

Summary of MP2900-04-AC

  • Page 1

    Maipu confidential & proprietary information page 1 of 80 mp2900 series router installation manual v1.0 maipu communication technology co., ltd no. 16, jiuxing avenue hi-tech park chengdu, sichuan province people’s republic of china - 610041 tel: (86) 28-85148850, 85148041 fax: (86) 28-85148948, 851...

  • Page 2: Preface

    Mypower s4220 & s4320 series switch installa tion manual v1.0 maipu confidential & proprietary information page 2 of 80 preface manual introduction this manual first describes the appearance, hardware structure, and board cards of mp2900 series router; secondly, describes the installation preparatio...

  • Page 3

    Mypower s4220 & s4320 series switch installa tion manual v1.0 maipu confidential & proprietary information page 3 of 80 symbol conventions: format description an alert that contains additional or supplementary information. An alert that calls attention to important information that if not understood...

  • Page 4

    Mypower s4220 & s4320 series switch installa tion manual v1.0 maipu confidential & proprietary information page 4 of 80 fax: (+8628)85148948 documentation feedback you can feed back your opinions and suggestions by: email: techsupport@maipu.Com technical hotline: 400-886-8669 we appreciate your comm...

  • Page 5: Contents

    Mypower s4220 & s4320 series switch installa tion manual v1.0 maipu confidential & proprietary information page 5 of 80 contents preface ............................................................................................................. 2 1 router introduction ................................

  • Page 6

    Mypower s4220 & s4320 series switch installa tion manual v1.0 maipu confidential & proprietary information page 6 of 80 4.1.2 set pc hyperterminal parameters.........................................................................................33 4.1.3 power on and start..............................

  • Page 7

    Mypower s4220 & s4320 series switch installa tion manual v1.0 maipu confidential & proprietary information page 7 of 80 e.4 e1/ce1 interface cable..............................................................................................................77 e.5 sa cable................................

  • Page 8: 1 Router Introduction

    Mypower s4220 & s4320 series switch installa tion manual v1.0 maipu confidential & proprietary information page 8 of 80 1 router introduction mp2900 series routers include the following four product models: mp2900-04-ac, mp2900-14- ac, mp2900-24-ac, and mp2900-24-dc48. 1.1 mp2900-04-ac appearance an...

  • Page 9

    Mypower s4220 & s4320 series switch installa tion manual v1.0 maipu confidential & proprietary information page 9 of 80 1.2 mp2900-14-ac appearance and hardware structure the chassis dimension of mp2900-14-ac is 442 mm x 380 mm x 44.2 mm (w x d x h). The front panel view of mp2900-14-ac is shown in ...

  • Page 10

    Mypower s4220 & s4320 series switch installa tion manual v1.0 maipu confidential & proprietary information page 10 of 80 1.3 mp2900-24-ac appearance and hardware structure the chassis dimension of mp2900-24-ac is 442 mm x 380 mm x 44.2 mm (w x d x h). The front panel view of mp2900-24-ac is shown in...

  • Page 11

    Mypower s4220 & s4320 series switch installa tion manual v1.0 maipu confidential & proprietary information page 11 of 80 f igure 1- 7 f ro nt p a nel v iew o f mp2900 - 24- dc48 1.Reset button 2.Function status indicator 3.Usb interface 4.1000base-x sfp ethernet combo optical interface 5.Console por...

  • Page 12

    Mypower s4220 & s4320 series switch installa tion manual v1.0 maipu confidential & proprietary information page 12 of 80 interface name description baud rate: 9600 bps ge0 – ge2 electrical interface wan interface, three rj-45 connectors, 10m/100m/1000m ethernet interface, supporting the (mdix) autom...

  • Page 13

    Mypower s4220 & s4320 series switch installa tion manual v1.0 maipu confidential & proprietary information page 13 of 80 indicator name indicator color status description fe0 – fe47 green always on: indicates that the port is up. Off: indicates that the port is down. Flash: indicates that data is tr...

  • Page 14: Installation Preparations

    Mypower s4220 & s4320 series switch installa tion manual v1.0 maipu confidential & proprietary information page 14 of 80 2 installation preparations when the router is delivered, there is the packing list. Please confirm whether the accessories are complete and good according to the items in the pac...

  • Page 15

    Mypower s4220 & s4320 series switch installa tion manual v1.0 maipu confidential & proprietary information page 15 of 80 2.2.2 electrical safety please check whether there are potential dangers. For example, the power is not grounded, power supply grounding is not reliable, and the ground is wet. Be...

  • Page 16

    Mypower s4220 & s4320 series switch installa tion manual v1.0 maipu confidential & proprietary information page 16 of 80 f igure 2- 1 u si ng met ho d o f a nti - s ta tic w rist 2.2.4 laser safety for the mp2900 series router with the optical interface, avoid directly viewing the laser beam from th...

  • Page 17

    Mypower s4220 & s4320 series switch installa tion manual v1.0 maipu confidential & proprietary information page 17 of 80 2.4 open-package and inspection the mp2900 series router adopts the carton packaging. The package comprises the carton, plastic bags, protection epe and other packaging materials....

  • Page 18: Router Installation

    Mypower s4220 & s4320 series switch installa tion manual v1.0 maipu confidential & proprietary information page 18 of 80 3 router installation 3.1 install router based on different installation positions, the router can be installed in the following two modes: install the router to the workbench. In...

  • Page 19

    Mypower s4220 & s4320 series switch installa tion manual v1.0 maipu confidential & proprietary information page 19 of 80 besides the slide, a tray also can be used to support the router. The installation process of the slide is the same as that of the tray. Therefore, the tray installation process i...

  • Page 20

    Mypower s4220 & s4320 series switch installa tion manual v1.0 maipu confidential & proprietary information page 20 of 80 install floating nut to cabinet before installing the chassis to the cabinet, first install the floating nut on the upright square hole bar on the both sides in the front of the c...

  • Page 21

    Mypower s4220 & s4320 series switch installa tion manual v1.0 maipu confidential & proprietary information page 21 of 80 f igure 3- 3 i n sta l l the ro uter to t he 19- in ch sta n da rd ca b ine t if the screw hole on the hanging ear cannot align to the floating nut installed on the cabinet correc...

  • Page 22

    Mypower s4220 & s4320 series switch installa tion manual v1.0 maipu confidential & proprietary information page 22 of 80 for the router and human security, the router must be grounded well. The resistance between the router chassis and the ground should be less than1 ohm. Generally, there is the gro...

  • Page 23

    Mypower s4220 & s4320 series switch installa tion manual v1.0 maipu confidential & proprietary information page 23 of 80 3.3 (optional) install interface daughter card components if the installed router contains the rm2b-3g interface daughter card, the usim card and 3g antenna need to be installed. ...

  • Page 24

    Mypower s4220 & s4320 series switch installa tion manual v1.0 maipu confidential & proprietary information page 24 of 80 f igure 3- 7 t urn o v er t he b u ckl e step 4: insert the usim card into the buckle. F igure 3- 8 i n sert th e usi m ca rd i nto th e b u ckl e step 5: turn upside down the buc...

  • Page 25

    Mypower s4220 & s4320 series switch installa tion manual v1.0 maipu confidential & proprietary information page 25 of 80 note the usim card insertion direction when installing the usim card. The broken corner of the usim card points to the outside board. Note the positive and negative side of the us...

  • Page 26

    Mypower s4220 & s4320 series switch installa tion manual v1.0 maipu confidential & proprietary information page 26 of 80 f igure 3- 13 t ighte n the 3g a nte n na step 4: turn the fixed 3g antenna up to finish the installation. F igure 3- 14 t urn the 3g a nte n na up f igure 3- 15 in sta l l ed 3g ...

  • Page 27

    Mypower s4220 & s4320 series switch installa tion manual v1.0 maipu confidential & proprietary information page 27 of 80 f igure 3- 16 3g int erf a ce da ughte r ca rd w ith d ua l a nten na 3.4 (optional) install spd 3.4.1 install ac power spd the ac power spd (surge protection device) suppresses t...

  • Page 28

    Mypower s4220 & s4320 series switch installa tion manual v1.0 maipu confidential & proprietary information page 28 of 80 the power spd is not provided with the router. The user can purchase it as required. When using the power spd, ensure the pe terminal is grounded. Insert the ac power plug of the ...

  • Page 29

    Mypower s4220 & s4320 series switch installa tion manual v1.0 maipu confidential & proprietary information page 29 of 80 carefully in the actual installation. Avoid the installation direction of the poe surge protector is connected reversely. The external cable is connected to the in end and the rou...

  • Page 30

    Mypower s4220 & s4320 series switch installa tion manual v1.0 maipu confidential & proprietary information page 30 of 80 3.5.3 connect dc power cable the dc power cable is connected as follows: step 1: check and ensure that the power switch on the router is off. Step 2: remove the plastic protection...

  • Page 31

    Mypower s4220 & s4320 series switch installa tion manual v1.0 maipu confidential & proprietary information page 31 of 80 f igure 3- 21 f a sten th e dc p o w er ca b l e termi na l 3.6 check after installation before checking whether the installation is correct, please confirm that the power is turn...

  • Page 32: Power On And Run Router

    Mypower s4220 & s4320 series switch installa tion manual v1.0 maipu confidential & proprietary information page 32 of 80 4 power on and run router 4.1 log into router when logging into the router for the first time, you can only log into the router via console port. This is the most basic mode of lo...

  • Page 33

    Mypower s4220 & s4320 series switch installa tion manual v1.0 maipu confidential & proprietary information page 33 of 80 f igure 4- 2 c o nn ec t t he ro u ter a n d pc v ia t he c o nso l e p o rt when the pc (or laptop) is connected with the router via the configuration cable, first connect the db...

  • Page 34

    Mypower s4220 & s4320 series switch installa tion manual v1.0 maipu confidential & proprietary information page 34 of 80 f igure 4- 3 h y p er t ermi na l co n nec tio n de scr ip tio n i nte rf a ce step 2: on the connection description interface, input the new connection name and click ok to displ...

  • Page 35

    Mypower s4220 & s4320 series switch installa tion manual v1.0 maipu confidential & proprietary information page 35 of 80 step 5: in the hyperterminal property dialog box, select properties to enter the properties window. Click settings in the properties window as shown in figure 4-6. Select the teln...

  • Page 36

    Mypower s4220 & s4320 series switch installa tion manual v1.0 maipu confidential & proprietary information page 36 of 80 enable the power supply switch of the router. Enable the power switch of the router. After the router is powered on and started, the configuration terminal displays some basic man...

  • Page 37

    Mypower s4220 & s4320 series switch installa tion manual v1.0 maipu confidential & proprietary information page 37 of 80 4.2 access network 4.2.1 access network via ethernet twisted pair the 10/100/1000base-t electrical interface of the router adopts the rj-45 connector. The port supports mdi/mdix a...

  • Page 38

    Mypower s4220 & s4320 series switch installa tion manual v1.0 maipu confidential & proprietary information page 38 of 80 step 1: wear the anti-static wrist and confirm that the anti-static wrist is well contacted with the skin and well-grounded. Step 2: get the sfp module out from the packing box. T...

  • Page 39

    Mypower s4220 & s4320 series switch installa tion manual v1.0 maipu confidential & proprietary information page 39 of 80 f igure 4- 10 remo v e th e o p tica l du st ca p step 3: remove the dust cap of the sfp module. F igure 4- 11 remo v e th e d ust ca p o f the sf p mo d ul e step 4: insert the p...

  • Page 40

    Mypower s4220 & s4320 series switch installa tion manual v1.0 maipu confidential & proprietary information page 40 of 80 f igure 4- 13 i n sta l l the du st ca p o f the o p ti ca l inter f a ce 4.3 hardware management this section describes various hardware management functions of the mp2900 series...

  • Page 41

    Mypower s4220 & s4320 series switch installa tion manual v1.0 maipu confidential & proprietary information page 41 of 80 t a bl e 4- 2 k ey f iel d de scr ip tio n o f t he inf o r ma tio n di sp l a y ed v ia sho w v e rsio n field description system id the serial number of the router device, provi...

  • Page 42

    Mypower s4220 & s4320 series switch installa tion manual v1.0 maipu confidential & proprietary information page 42 of 80 field description system fan information (fan 1 - online) system fan information (fan 1, the status is online) status fan status information speed fan speed percentage, that is, 2...

  • Page 43: Router Troubleshooting

    Mypower s4220 & s4320 series switch installa tion manual v1.0 maipu confidential & proprietary information page 43 of 80 5 router troubleshooting 5.1 troubleshooting of configuration system after the router is powered on and if the system is normal, the start information is displayed on the configur...

  • Page 44

    Mypower s4220 & s4320 series switch installa tion manual v1.0 maipu confidential & proprietary information page 44 of 80 vt100), and please check correspondingly. For details, refer to 4.1.2 set pc hyperterminal parameters . 5.2 troubleshooting about fan a fan status indicator is on the panel of the...

  • Page 45

    Mypower s4220 & s4320 series switch installa tion manual v1.0 maipu confidential & proprietary information page 45 of 80 the voltage are normal. Step 2: check whether the power switch on the back panel of the router is on. Step 3: check the power cable connection. Remove and plug the power cable aga...

  • Page 46: Router Maintenance

    Mypower s4220 & s4320 series switch installa tion manual v1.0 maipu confidential & proprietary information page 46 of 80 6 router maintenance 6.1 change interface daughter card the interface daughter card of the mp2900 series router does not support the hot plugging. The interface daughter card of t...

  • Page 47

    Mypower s4220 & s4320 series switch installa tion manual v1.0 maipu confidential & proprietary information page 47 of 80 f igure 6- 2 u ni ns ta l l the i nterf a ce da ugh ter ca rd step 4: put the uninstalled interface daughter card on the anti-static mat or the initial packaging box. Step 5: push...

  • Page 48

    Mypower s4220 & s4320 series switch installa tion manual v1.0 maipu confidential & proprietary information page 48 of 80 6.2 change pluggable optical module the mp2900 series router only supports the sfp module. The following describes how to change the sfp module. When installing or uninstalling th...

  • Page 49

    Mypower s4220 & s4320 series switch installa tion manual v1.0 maipu confidential & proprietary information page 49 of 80 f igure 6- 7 i n sta l l the sf p mo dul e step 5: remove the dust cap of the sfp module, as shown in the following figure. F igure 6- 8 u ni ns ta l l the dus t ca p o f the sf p...

  • Page 50

    Mypower s4220 & s4320 series switch installa tion manual v1.0 maipu confidential & proprietary information page 50 of 80 daughter card, and pigtail of the router. The main board can only be maintained by opening the cover and therefore it is not included in the dedusting. All dedusting must be opera...

  • Page 51

    Mypower s4220 & s4320 series switch installa tion manual v1.0 maipu confidential & proprietary information page 51 of 80 dedusted when the maintenance personnel dedusts the interface daughter card. Step 2: replace the interface daughter card to be dedusted. For details, refer to 6.1 change interface...

  • Page 52

    Mypower s4220 & s4320 series switch installa tion manual v1.0 maipu confidential & proprietary information page 52 of 80 pigtail connector connected by the optical interface when the pigtail requires to be removed. In this way, on the one hand, the invisible laser sent by the laser maser can be prev...

  • Page 53: Appendix

    Mypower s4220 & s4320 series switch installa tion manual v1.0 maipu confidential & proprietary information page 53 of 80 appendix a entire router and common module specifications a.1 power consumption/dimension/weight a p p endix ta b l e a - 1 p o w er co nsu mp tio n a n d dime n sio n model power...

  • Page 54

    Mypower s4220 & s4320 series switch installa tion manual v1.0 maipu confidential & proprietary information page 54 of 80 a.2 rm2b interface daughter card specifications a.2.1 rm2b-1ge the rm2b-1ge interface daughter card is the gigabit ethernet combo interface card, supporting one 10base-t/100base-t...

  • Page 55

    Mypower s4220 & s4320 series switch installa tion manual v1.0 maipu confidential & proprietary information page 55 of 80 a p p endix f ig ure a - 2 a p p ea ra nce o f t he rm2 b- 4ge t ca rd the description of the rm2b-4getinterface daughter card is shown in the following table. A p p endix ta b l ...

  • Page 56

    Mypower s4220 & s4320 series switch installa tion manual v1.0 maipu confidential & proprietary information page 56 of 80 indicator name indicator color status link green off: indicates that the link is not connected. Flash: indicates that the loop is detected on the line. Always on: indicates that t...

  • Page 57

    Mypower s4220 & s4320 series switch installa tion manual v1.0 maipu confidential & proprietary information page 57 of 80 a p p endix ta b l e a - 11 d escrip tio n o f t he r m2b- 1ce 1 inte rf a ce da ug hter ca rd interface name description 0 channelized ce1 interface of the tdm type the meaning o...

  • Page 58

    Mypower s4220 & s4320 series switch installa tion manual v1.0 maipu confidential & proprietary information page 58 of 80 the panel view of the rm2b-1sa card is shown in the following figure. A p p endix f ig ure a - 7 a p p ea ra nce o f t he rm2 b- 1sa ca rd the description of the rm2b-1sa interfac...

  • Page 59

    Mypower s4220 & s4320 series switch installa tion manual v1.0 maipu confidential & proprietary information page 59 of 80 indicator name indicator color status always on: indicates that the link is connected. Flash: indicates that the data is transmitted and received over the link. A.2.9 rm2b-sm1 the...

  • Page 60

    Mypower s4220 & s4320 series switch installa tion manual v1.0 maipu confidential & proprietary information page 60 of 80 indicator name indicator color status established. Flash: indicates that the data is transmitted and received. Rssi green off: indicates no signal or weak signal. Flash: indicates...

  • Page 61

    Mypower s4220 & s4320 series switch installa tion manual v1.0 maipu confidential & proprietary information page 61 of 80 a p p endix f ig ure a - 12 a p p ea ra nce o f t he rm2 b- 3g- c ca rd the meanings of the indicators on the rm2b-3g-c interface daughter card are shown in the following table. A...

  • Page 62

    Mypower s4220 & s4320 series switch installa tion manual v1.0 maipu confidential & proprietary information page 62 of 80 b specifications of general interfaces this section describes the attributes of the router interfaces. B.1 10base-t/100base-tx/1000base-t-rj45 electrical interface attributes a p ...

  • Page 63

    Mypower s4220 & s4320 series switch installa tion manual v1.0 maipu confidential & proprietary information page 63 of 80 b.3 high-speed v.24/v.35 serial interface attributes a p p endix ta b l e b- 3 h ig h - sp ee d v .24/ v.35 s eria l interf a ce a ttrib ute attribute description synchronization ...

  • Page 64

    Mypower s4220 & s4320 series switch installa tion manual v1.0 maipu confidential & proprietary information page 64 of 80 c router running environment requirement c.1 environment requirement c.1.1 temperature requirement to ensure that the router can work normally, it is recommended to maintain certa...

  • Page 65

    Mypower s4220 & s4320 series switch installa tion manual v1.0 maipu confidential & proprietary information page 65 of 80 description humidity short-term work condition 0% – 95%/rh measuring points of the working temperature and humidity of the mp2900 router in the equipment room mean the values meas...

  • Page 66

    Mypower s4220 & s4320 series switch installa tion manual v1.0 maipu confidential & proprietary information page 66 of 80 we should prevent the harmful gases, such as so 2 , h 2 s, no 2 , nh 3 and cl 2 , from entering the equipment room. The specific limited values are as shown in the following table...

  • Page 67

    Mypower s4220 & s4320 series switch installa tion manual v1.0 maipu confidential & proprietary information page 67 of 80 it is required to adopt the un-interruptible power, such as ups ( uninterrupted power supply ), as the ac backup power supply. The ac backup power and ac power should keep the sam...

  • Page 68

    Mypower s4220 & s4320 series switch installa tion manual v1.0 maipu confidential & proprietary information page 68 of 80 item index dc power supply bearing the lightning current capability > 1.5 x rated current capability stabilized voltage precision requirement the ac input voltage ranging within 8...

  • Page 69

    Mypower s4220 & s4320 series switch installa tion manual v1.0 maipu confidential & proprietary information page 69 of 80 d router grounding specifications and protection d.1 routing grounding specifications the grounding specifications include universal grounding specification, building grounding sp...

  • Page 70

    Mypower s4220 & s4320 series switch installa tion manual v1.0 maipu confidential & proprietary information page 70 of 80 a p p endix ta b l e d- 2 r o ut er gro un di ng sp ecif i ca t io ns no. Description 1 the protection ground (pgnd) of the router should be connected to the nearest protection gr...

  • Page 71

    Mypower s4220 & s4320 series switch installa tion manual v1.0 maipu confidential & proprietary information page 71 of 80 d.1.5 laying specifications of signal wires the laying specifications of the signal wire are as shown in the following table. A p p endix ta b l e d- 4 l a y ing sp e cif ica tio ...

  • Page 72

    Mypower s4220 & s4320 series switch installa tion manual v1.0 maipu confidential & proprietary information page 72 of 80 d.2 router protection this section mainly describes the precautions for the lightning protection of the router during installation. D.2.1 general requirement of lightning protecti...

  • Page 73

    Mypower s4220 & s4320 series switch installa tion manual v1.0 maipu confidential & proprietary information page 73 of 80 d.2.2 installation method of cable wiring installation method of power cable one end of the power cable is connected to the router and the other end is connected to the power stri...

  • Page 74

    Mypower s4220 & s4320 series switch installa tion manual v1.0 maipu confidential & proprietary information page 74 of 80 force time tensile force (n) crush force (n/100mm) short-term force 150 500 long-term force 80 100 installation method of fiber after the fiber is drawn out from the optical inter...

  • Page 75

    Mypower s4220 & s4320 series switch installa tion manual v1.0 maipu confidential & proprietary information page 75 of 80 e cables e.1 console cable connected to the nine-core serial interface socket of the pc, the console cable of the mp2900 series router is an eight-core unshielded cable. The one s...

  • Page 76

    Mypower s4220 & s4320 series switch installa tion manual v1.0 maipu confidential & proprietary information page 76 of 80 a p p endix ta b l e e - 2 c o nne ctio n ta b l e o f the r j45 s tra ight - thro ugh ca b l e ( ca tego ry - 5 tw isted p a ir ) rj-45 signal direction rj-45 1 tx0+ → 1 2 tx0- →...

  • Page 77

    Mypower s4220 & s4320 series switch installa tion manual v1.0 maipu confidential & proprietary information page 77 of 80 rj-45 signal direction rj-45 4 td2+ ←→ 4 5 td2- ←→ 5 7 td3+ ←→ 7 8 td3- ←→ 8 e.4 e1/ce1 interface cable e.4.1 e1/ce1 rj45-rj45 cross twisted pair when using the e1/ce1 interface d...

  • Page 78

    Mypower s4220 & s4320 series switch installa tion manual v1.0 maipu confidential & proprietary information page 78 of 80 a p p endix f ig ure e - 2 rj45- 75Ω co a x ia l cab l e where, the cable length is 3m±3c m. The connection relationship of the dedicated interface cables of rm2b-1e1/rm2b-1ce1 an...

  • Page 79

    Mypower s4220 & s4320 series switch installa tion manual v1.0 maipu confidential & proprietary information page 79 of 80 e.5.2 v.24dce cable converting sdb26 pin to db25 hole the view of the cable is shown in the following figure. A p p endix f ig ure e - 4 v iew o f t he v.24dce ca b l e co nv erti...

  • Page 80

    Mypower s4220 & s4320 series switch installa tion manual v1.0 maipu confidential & proprietary information page 80 of 80 f environmental substance statement a p p endix ta b l e f - 1 t o x ic a nd ha za rdo us s ub sta n ce na me a nd co nte nt part name 1 toxic and hazardous s ubstance or element ...