Maipu MyPower S4100 Series Install Manual - page 21
MyPower S4100 Series Switch Install Manual (S4152F-POE-AC V2) V1.0
Maipu Confidential & Proprietary Information
Page 21 of 23
Caution
:
1.
Verify sign on the interface to ensure using other ports. Connecting to
wrong ports may damage the transceiver or other ports.
2.
When connecting other devices via a fiber to the switch, the output
power of the fiber cable cannot exceed the maximum received power
of the modules. It damages the switch. Do not look at the fiber bore
when the switch is in operation. It may damage your eyes.
Connect Power Supply
MyPower S4152F-POE-AC V2 routing switch uses 220V AC power supply
by default. It adapts voltage floating (for more details, refer to product
specifications).
Connect the power supply cables as follows:
Connect the power cable to MyPower S4152F-POE-AC V2
1.
Insert one end of the power cable provided in the accessory kit into
the power slot, and the other end to power socket (with overload and
leakage protection) on the switch back panel.
2.
Check the power status indicator on the switch front panel. The power
indicator should blink. MyPower S4152F-POE-AC V2 routing switch can
automatically adjust the input voltage. As soon as the input voltage is
in the range printed on the switch surface, the switch can operate
correctly.
3.
When the switch is powered on, it automatically executes self-check
and startups.