Majestic AMP5145 User Manual - page 7
OPERATION
CONTROL PORTS and A/V OUTPUTS
Monitors connect to AV Outputs 1, 2 & 3. Switching AV sources is
done by using the A/V Switch Controllers.
CTR-5145 connected to Control Port 1, AVS-5145 connected to Control Ports 2 and 3.
If control ports 2 or 3 do not have the AVS-5145 device attached, then
the AV2 and AV3 ouptus will be controlled by the main AV Controller
(CTR-5145).
SYSTEM SETUP (CTR-5145 Wired Controller)
1.
IR Receiver
2.
Power Button
3.
P-Link Button
4.
+ / - Volume Adjust Button
5.
Mute Button
6.
Menu Button
7.
UP / Down Button
8.
Surround Sound Button
9.
Surround Sound Button
10.
Button
11.
Button
AV Switching
Press or button to cycle through AV1, AV2, AV3 and AV4
Volume Adjustment
Press or to increase or decrease output volume.
Power ON / OFF
Press to switch power on / off.
Power Link (For System Monitor ONLY)
Press button to activate Power Link functions.
NO:
The power of the AMP5145 will follow the monitor connected to Port.
OFF:
The monitor connected to Port 1 is powered independantly. The Power to the
AMP5145 will always be on.
ALL:
The Power of monitors connected to Ports 2 and 3 and the AMP5145 will follow
the power of the monitor on Port 1.
MUTE Volume
Press button to turn MUTE on / off.
Page 6
amp5145 - Manual.indd 7
6/08/2004 11:24:47 AM