Majestic Fireplaces TQS36 Installation Instructions Manual

Tranquility Stones Kit

Installation Instructions

Model: TQS36

for use on Gas Fireplace Models: 

DVBR36RN* (GFCN3J0)

* The Tranquility Stones may also be used if the unit is converted to propane

CAUTION: This kit is designed for use on 

the above gas fireplace models ONLY.

CAUTION: This kit must be installed by a 

qualified service technician.

Read the instructions carefully before beginning 

the installation.

CAUTION: Allow the unit to cool complete-

ly if it has been in operation.

Kit contents:

 Stone tray, stones (30), ceramic overlay, 

hardware package, installation instructions.

Check the contents of the carton with contents list. If 

any parts are missing or damaged, contact your dealer.

Turn OFF gas supply and electric supply to the unit 

before beginning.

Installation Instructions

1.  Remove valve cover. (Fig. 1)

2.  Release the two (2) clamps at the bottom of the 

window frame by pulling back on the clamp handles. 

(Fig. 2)

3.  Lift off the glass frame. (Fig. 2)

4.  Remove the logs and any ember material from the 

fireplace. Discard logs and ember material.

5.  Remove the two (2) screws securing the grate. Re-

move the grate and reinstall the two (2) screws. (Fig. 

3) Discard grate.

C           US

H100

hearth Panels

3/15/99   djt

Grate

Screw

Burner

Screw

Hearth Panels

Front of Fireplace

H100

Fig. 1

  Remove grate.

G584-500

Remove valve cover

2/99   djt

Valve Cover

Pins

Locating Holes

Valve

G584-500

Fig. 1

  Remove valve cover.

G584-501 

Remove glass frame

2/99   djt

Clamps

Glass 

Frame

Fireplace 

Front

Glass 

Panel

Pull 

Clamp 

Hook

Glass 

Panel

G584-501

Fig. 2

  Remove glass frame.

6.  If there is any lava rock on the hearth panels, 

remove and set aside. Remove and discard hearth 

panels.

7.  Install the stone tray in the fireplace. The two (2) 

small holes on the right side back of the assembly fit 

over the two (2) studs on the rear log support. (Figs. 

4 & 5)

8.  Secure the stone tray in position with the two (2) 

nuts and one (1) screw provided. (Fig. 5)

9.  Replace any lava rock removed from the fireplace.

20012963  3/08  Rev. 2