Majestic TMOO7 User Manual - page 10
TMOO7 - User Manual
5) Preset Function:
Press the
[MENU]
button five times continuously, you will access the
pre-set function menu. Press
[CH+]
or
[CH-]
to choose the item which
you want to access, then press
[V+]
or
[V-]
to make your selection. The
options are as follows:
AUTO SEARCH: The default setting is “Auto”, press
[V+]
or
[V-]
to
activate the Auto Search. When a signal is detected, it will be saved in
the first available slot.
SEARCH: Press
[CH+]
or
[CH-]
to choose this item, press
[V+]
or
[V-]
to
proceed to search channels manually. Once a signal has been detected
it will be stored.
FINE TUNE: Press
[CH+]
or
[CH-]
to choose this item, by pressing
[V+]
or
[V-]
, you can adjust the fine tuning manually while the image is on
the screen.
BAND: Press
[CH+]
or
[CH-]
to choose this item, press
[V+]
or
[V-]
to
choose the band, the band formats which you can choose have:
VHF-L, VHL-H, UHF.
PROGRAM: Press
[CH+]
or
[CH-]
to choose this item, press
[V+]
or
[V-]
to increase or decrease the channel, the total channels available for
storage is 255.
SKIP: Press
[CH+]
or
[CH-]
to choose this item, press
[V+]
or
[V-]
to wipe
the current channel.
Page
9