Major Tech HLF30CW Instruction Manual - page 2
Specifications:
Type
Rated Power:
Glass
Weight
Maximum
projected
area
Dimensions
Remark:
HLF30CW
30W
(
1x30W
)
164x154x4mm
1.7Kg
0.03M
2
275x120x340mm
Electric shock protection class:
Ⅰ
External light protection class:
IP65
Lamp socket size:LED
Rated voltage:220-240V~ 50Hz
Max height
:
Universal for operating position
Bridgelux LED
Lifespan 50 000 Hours
Power source: 100VAC~240VAC
Housing : Die-casting aluminium
IP65
Luminous flux : 2250 lumens
Frequency : 50Hz
Power factor 0.9 work life
Power : 30W
Beam angle: 120°
Max height: 3m
Safety instructions:
1. Before mounting and maintenance please make sure that the electrical supply has been
switched off to avoid electric shock.
2. The light must be earthed.
3. The power cord must be a VDE-certified H05RN-F 3G 1.0 mm ² cable waterproof.
4. Replace the cracked protection glass immediately and use only original parts to substitute.
5. Connect the yellow/green conductor of the connection supply cable with the connection
block, marked with the earthings symbol.Mount the other wires into the connector
block .see mark N and L
6. Before the maintenance work takes place, the power should be switched off. The
maintaining should be done only by a qualified electrician.
Installation:
1. The light is only suitable for fixed mounting.
2. Fix the appliance by 2 screws of minimum 6 mm and maximum 7 mm diameter.
3. Connect the yellow/green conductor of the connection supply cable with the connection
block, marked with the earthings symbol.Mount the other wires into the connector
block .see mark N and L.