V2.3.
Function limited warranty: ----------------------------------------------------2 installation: ----------------------------------------------------3 panel controls: --------------------------------------------4 overview:---------------------------------------------------------------6 patch ideas ---...
2 limited warranty: make noise warrants this product to be free of defects in materials or construction for a period of one year from the date of purchase (proof of purchase/invoice required). Malfunction resulting from wrong power supply voltages, backwards or reversed eurorack bus board cable conn...
3 electrocution hazard! Bus board connection cable cable. Do not touch any electrical terminals when attaching any eurorack bus board cable. The make noise function is an electronic music module requiring 30ma of +12vdc and 20 ma of -12vdc regulated voltages and a properly formatted distribution rec...
4 function panel controls 1. Signal in: direct coupled input to circuit. Use for lag, portamento, s&h, t&h and asr (attack sustain release type envelopes). 2. Trigger in: gate or pulse applied to this input will trigger the circuit regardless of activity at the signal in. The result being a 0v to 8v...
5 function panel controls (cont’d) 8. Both cv in: bi-polar exponential control signal input for entire function. Contrary to the rise and fall cv in, both has an exponential response and positive control signals decrease total time while negative control signals increase total time. 9. Fall cv in: l...
6 overview: function is part of the maths family of control voltage utility modules. It is a small analog computer designed for musical purposes. Amongst other things, the function will allow you to: 1. Generate a variety of linear, logarithmic, or exponential triggered or continuous functions 2. Ge...
7 patch ideas analog/control voltages: voltage controlled transient generator (attack/ decay envelope) a pulse or gate applied to the trigger in starts the transient function, which rises from 0v to 8v at a rate determined by the rise parameter, then falls from 8v to 0v at a rate determined by the f...
8 patch ideas digital/gates/clocking: typical voltage controlled pulse (clock, lfo) same as voltage controlled triangle function, only the output is taken from eoc or eor. Using eor, the rise parame- ter will more effectively adjust frequency, and fall parameter will adjust pulse width. Using eoc, t...
