V 1.0
Limited warranty: make noise warrants this product to be free of defects in materials or construction for a period of one year from the date of purchase (proof of purchase/invoice required). Malfunction resulting from wrong power supply voltages, backwards or reversed eurorack bus board cable connec...
Electrocution hazard! The make noise lxd is an electronic music module requiring 30 ma of +12vdc and 30 ma of -12vdc regulated voltages and a properly formatted distribution receptacle to operate. It must be properly installed into a eurorack format modular synthesizer system case. Go to http://www....
The lxd is a dual-response, two channel, direct-coupled, low pass gate, which utilizes two vactrols in order to provide simultaneous control over the amplitude and frequency content of an input signal. It is, in essence, a vcfa (voltage controlled filter amplifier). Unlike the optomix and some other...
1 2 lxd panel controls 1. Signal in ch. 1: direct coupled signal input for the 12db/ octave lpg circuit, capable of accepting audio or control signals. Range of up to 15vpp. 2. Control signal in ch. 1: direct-coupled, highly sensitive, cv input for the corresponding channel’s vactrol gate. Range 0v-...
It’s a vca, it’s a vcf... The low pass gate operates simultaneously in the amplitude and frequency domains. As the control signal becomes more positive, the amplitude of the processed signal increases: the low frequencies being more quickly amplified than high frequencies. As the control signal beco...
: low pass gates such as the lxd are typically used to process audio signals. The lxd excels at processing harmonically-rich sounds. Patch your audio signal (e.G. Sto variable shape output; dpo square output) to the signal input of ch1. Next, patch a control voltage, such as an envelope or lfo (e.G....
If utilizing the lxd in a sequencing patch, the strike input may act as an accent parameter. Patch an attenuated envelope signal (e.G. From maths channel 1 signal output with the attenuvertor set to about 2 o’ clock) to the control input. Apply an accent gate/signal to the strike input. Steps where ...
Patch concept: the new bongo patch concept: fm pings: variation: in order to dynamically control the fm pings, first set up the patch as described above. Remove the cable from the lxd ch. 1 output and apply a slow envelope from maths or function (or any positively-moving control voltage) to lxd’s ch...