Make Noise modDemix Manual

Other manuals for modDemix: Manual

Summary of modDemix

  • Page 1

    Moddemix.

  • Page 2

    Limited warranty: make noise warrants this product to be free of defects in materials or construction for a period of one year from the date of purchase (proof of purchase/invoice required). Malfunction resulting from wrong power supply voltages, backwards or reversed eurorack bus board cable connec...

  • Page 3: -12V

    Electrocution hazard! Always turn the eurorack case off and unplug the power cord before plugging or un-plugging any eurorack bus board connection cable cable. Do not touch any electrical terminals when attaching any eurorack bus board cable. The make noise moddemix is an electronic music module req...

  • Page 4

    1 2 5 4 7 6 8 10 11 12 3 9 moddemix panel controls 1. Signal 1 in: signal to be processed. 2. Carrier/ cv 1 in: determines amplitude & phase of signal 1 in. 3. Channel 1 leds: led indication of signal activity in four quadrants. Vertical position represents amplitude and phase of input signal; horiz...

  • Page 5

    Getting to know moddemix: standard am, balanced modulation, signal multiplication, frequency mixing, single sideband, double side-band and even xor (as in boolean logic) have all been used to implement “ring modulators” for musical purposes in the last 50 years. In a way, ring modulation has become ...

  • Page 6

    Using same patch as above, add a negative offset to the cycling ch. 1 of maths, by adjusting ch. 2 panel control to full ccw. Observe balanced modulation. Observe the low amount of carrier feed-thorough. Depending upon the negative offset added, the carrier all but vanishes, making the resulting sid...

  • Page 7

    Ring modulation with increased fundamental presence patch vco output such as a sine wave to ch1 signal in, and modulating signal such as another sine wave to ch2 carrier/cv in. Take output from sum out. Adjust balance of rm signal and fundamental with the strength knobs. Moddemod to ease the patchin...

  • Page 8

    Voltage controlled crossfading and panning with moddemix and maths crossfading send two signals of your choice to the moddemix ch1 and ch2 inputs. Select a positive-going control signal such as a maths/function envelope or a sequence from rene. Using a multiple, patch the control signal to moddemix ...