1 english ( o rigina l in st ruct ions) instruction manual double insulation important: read before using. Cutter 4100nh2 009553.
2 english (original instructions) specifications model 4100nh2 wheel diameter 110 mm 125 mm at 90° 32.5 mm 40 mm max. Cutting capacities at 45° 21.5 mm 27 mm no load speed (min -1 ) 12,200 overall length 238 mm net weight 3.0 kg safety class /ii • due to our continuing program of research and develo...
3 6. Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. 7. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or enta...
4 2. Use only diamond cut-off wheels for your power tool. Just because an accessory can be attached to your power tool, it does not assure safe operation. 3. The rated speed of the accessory must be at least equal to the maximum speed marked on the power tool. Accessories running faster than their r...
5 c) do not position your body in line with the rotating wheel. Kickback will propel the tool in direction opposite to the wheel’s movement at the point of snagging. D) use special care when working corners, sharp edges etc. Avoid bouncing and snagging the accessory. Corners, sharp edges or bouncing...
6 1 2 009556 caution: • after adjusting the depth of cut, always tighten the clamping nut securely. Sighting a b 009559 for straight cuts, align a with your cutting line on the workpiece. For 45° bevel cuts, align b with it. Switch action caution: • before plugging in the tool, always check to see t...
7 adjust the amount of water flow. Hold the tool firmly. Set the base plate on the workpiece to be cut without the wheel making any contact. Then turn the tool on and wait until the wheel attains full speed. Now simply move the tool forward over the workpiece surface, keeping it flat and advancing s...
8 makita corporation anjo, aichi, japan www.Makita.Com 885142-910
