I n s t r u c t i o n m a n u a l warning: for your personal safety, read and understand before using. Save these instructions for future reference. English cordless driver drill model 6319d model 6339d model 6349d 005768.
2 specifications • due to our continuing programme of research and development, the specifications herein are subject to change without notice. • note: specifications may differ from country to country. Intended use the tool is intended for drilling and screw driving in wood, metal and plastic. For ...
3 general safety rules gea001-1 warning: read all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term “power tool” in all of the warnings listed below refers to your mains- operated (corded) power tool or battery-operated (...
4 12. Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. 13. Do not overreach. Keep proper footing and balance at all times. This enables bet- ter control of the power tool in unexpe...
5 additional safety rules for power tool geb001-1 do not let comfort or familiarity with product (gained from repeated use) replace strict adherence to drill safety rules. If you use this power tool unsafely or incorrectly, you can suffer serious personal injury. 1. Use auxiliary handles supplied wi...
6 6. Do not short the battery cartridge: (1) do not touch the terminals with any con- ductive material. (2) avoid storing battery cartridge in a con- tainer with other metal objects such as nails, coins, etc. (3) do not expose battery cartridge to water or rain. A battery short can cause a large cur...
7 functional description caution: • always be sure that the tool is switched off and the battery cartridge is removed before adjusting or checking function on the tool. Installing or removing battery cartridge • always switch off the tool before insertion or removal of the battery cartridge. • to re...
8 speed change this tool has a three-gear speed change lever. To change the speed, first switch off the tool and then slide the speed change lever to the “1” position for low speed, “2” position for medium speed or “3” position for high speed. Be sure that the speed change lever is set to the correc...
9 assembly caution: • always be sure that the tool is switched off and the battery cartridge is removed before carrying out any work on the tool. Installing side grip (auxiliary handle) always use the side grip to ensure operating safety. Insert the side grip so that the protrusions on the grip base...
10 operation screwdriving operation first, slide the action mode change lever to the position of symbol and select the fastening torque. Place the point of the driver bit in the screw head and apply pressure to the tool. Start the tool slowly and then increase the speed gradually. Release the switch...
11 • a stuck bit can be removed simply by setting the reversing switch to reverse rotation in order to back out. However, the tool may back out abruptly if you do not hold it firmly. • always secure small workpieces in a vise or similar hold-down device. • if the tool is operated continuously until ...
Makita corporation anjo, aichi, japan 884559a229.
