I n s t r u c t i o n m a n u a l warning: for your personal safety, read and understand before using. Save these instructions for future reference. English cordless driver drill model 6327d model 6328d 004544.
2 specifications • due to our continuing programme of research and development, the specifications herein are subject to change without notice. • note: specifications may differ from country to country. Intended use the tool is intended for drilling and screw driving in wood, metal and plastic. For ...
3 caught in moving parts. Non-skid footwear is recom- mended when working outdoors. Wear protecting hair covering to contain long hair. 8. Use protective equipment. Use safety glasses and if the cutting operation is dusty, a face or dust mask. 9. Connect dust extraction equipment. If devices are pro...
4 important safety instructions for battery cartridge enc004-1 1. Before using battery cartridge, read all instruc- tions and cautionary markings on (1) battery charger, (2) battery, and (3) product using bat- tery. 2. Do not disassemble battery cartridge. 3. If operating time has become excessively...
5 functional description caution: • always be sure that the tool is switched off and the battery cartridge is removed before adjusting or checking function on the tool. Installing or removing battery cartridge • always switch off the tool before insertion or removal of the battery cartridge. • to re...
6 speed change to change the speed, first switch off the tool and then slide the speed change lever to the “ii” side for high speed or “i” side for low speed. Be sure that the speed change lever is set to the correct position before operation. Use the right speed for your job. Caution: • always set ...
7 operation screwdriving operation caution: • adjust the adjusting ring to the proper torque level for your work. Place the point of the driver bit in the screw head and apply pressure to the tool. Start the tool slowly and then increase the speed gradually. Release the switch trigger as soon as the...
8 • a stuck bit can be removed simply by setting the reversing switch to reverse rotation in order to back out. However, the tool may back out abruptly if you do not hold it firmly. • always secure small workpieces in a vise or similar hold-down device. • if the tool is operated continuously until t...
Memo 9.
Memo 10
Memo 11.
Makita corporation 884349d220
