Makita BDF446 Instruction Manual - Specifications
4
ENGLISH
Explanation of general view
SPECIFICATIONS
• Due to our continuing programme of research and development, the specifications herein are subject to change without
notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
END004-4
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
..... Read instruction manual.
ENE034-1
Intended use
The tool is intended for drilling and screw driving in wood,
metal and plastic.
GEA006-2
General Power Tool Safety
Warnings
WARNING! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
2. Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause you
to lose control.
Electrical safety
4. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
5. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
6. Do not expose power tools to rain or wet
conditions. Water entering a power tool will increase
the risk of electric shock.
7. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords increase
the risk of electric shock.
1.
Red indicator
2.
Button
3.
Battery cartridge
4.
Star mark
5.
Switch trigger
6.
Lamp
7.
Reversing switch lever
8.
Speed change lever
9.
Adjusting ring
10. Graduation
11. Arrow
12. Sleeve
13. Groove
14. Hook
15. Screw
16. Bit holder
17. Bit
18. Limit mark
19. Rear cover
20. Recessed part
21. Spring
22. Arm
23. Carbon brush cap
24. Hole
Model
BDF446
BDF456
Capacities
Steel
13 mm
13 mm
Wood
38 mm
38 mm
Wood screw
6 mm x 75 mm
10 mm x 89 mm
Machine screw
M6
M6
No load speed (min
-1
)
High (2)
0 - 1,500
0 - 1,500
Low (1)
0 - 400
0 - 400
Overall length
192 mm
192 mm
Net weight
1.7 kg
1.5 kg (with battery BL1815)
1.7 kg (with battery BL1830)
Rated voltage
D.C. 14.4 V
D.C. 18 V