Makita CP100D Instruction Manual - Maintenance
7
ENGLISH
Hold the tool irmly. Turn on the tool, then set the blade
against the material to be cut, and then move the tool
forward.
NOTICE:
Do not apply excessive force to the
tool. It does not help to cut the material smoothly.
NOTE:
When cutting the thin material such as fabric,
apply suficient tension to the material while holding it
and move the tool slowly.
When cutting a disc (CD, DVD, or Blu-ray Disc), tilt it as
shown in the igure to cut it smoothly.
CAUTION:
When cutting materials, be sure
to wear safety glasses to avoid injury caused by
lying debris.
NOTICE:
Do not cut solid plate thicker than CD,
DVD, or Blu-ray Disc, or plate harder than CD,
DVD, or Blu-ray Disc.
When the tool is jammed, rotate it sideways, and then
pull it slowly as shown in the igure.
MAINTENANCE
CAUTION:
Always be sure that the tool is
switched off and the battery cartridge is removed
before attempting to perform inspection or
maintenance.
NOTICE:
Never use gasoline, benzine, thinner,
alcohol or the like. Discoloration, deformation or
cracks may result.
To maintain product SAFETY and RELIABILITY,
repairs, any other maintenance or adjustment should
be performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.
OPTIONAL
ACCESSORIES
CAUTION:
These accessories or attachments
are recommended for use with your Makita tool
speciied in this manual. The use of any other
accessories or attachments might present a risk of
injury to persons. Only use accessory or attachment
for its stated purpose.
If you need any assistance for more details regard-
ing these accessories, ask your local Makita Service
Center.
•
Blade set
•
Makita genuine battery and charger
NOTE: Some items in the list may be included in the
tool package as standard accessories. They may
differ from country to country.