Instruction manual cordless angle drill da332d da333d eng lish: o rig in al in stru cti on s read before use..
2 english specifications model: da332d da333d drilling capacities steel 10 mm wood 12 mm no load speed 0 - 1,100 min -1 overall length 313 mm - 332 mm rated voltage d.C. 10.8 v - 12 v max battery cartridge bl1015 / bl1016 / bl1020b / bl1021b / bl1040b / bl1041b net weight 1.2 - 1.3 kg 1.2 - 1.4 kg •...
3 english safety warnings general power tool safety warnings warning: read all safety warnings, instruc- tions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. Save all warnings ...
4 english 3. Disconnect the plug from the power source and/or remove the battery pack, if detachable, from the power tool before making any adjust- ments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally. 4. Store i...
5 english 3. If operating time has become excessively shorter, stop operating immediately. It may result in a risk of overheating, possible burns and even an explosion. 4. If electrolyte gets into your eyes, rinse them out with clear water and seek medical atten- tion right away. It may result in lo...
6 english indicating the remaining battery capacity only for battery cartridges with the indicator 1 2 ► 1. Indicator lamps 2. Check button press the check button on the battery cartridge to indi- cate the remaining battery capacity. The indicator lamps light up for a few seconds. Indicator lamps re...
7 english for model da333d 1 ► 1. Lamp pull the switch lever to light up the lamp. The lamp keeps on lighting while the switch lever is being pulled. The light automatically goes out approximately 10 sec- onds after the switch lever is released. Note: use a dry cloth to wipe the dirt off the lens of...
8 english installing hook 3 2 1 ► 1. Groove 2. Hook 3. Screw the hook is convenient for temporarily hanging the tool. This can be installed on either side of the tool. To install the hook, insert it into a groove in the tool housing on either side and then secure it with a screw. To remove, loosen t...
9 english drilling operation drilling in wood when drilling in wood, the best results are obtained with wood drills equipped with a guide screw. The guide screw makes drilling easier by pulling the drill bit into the workpiece. Drilling in metal to prevent the drill bit from slipping when starting a...
10
11.
Www.Makita.Com makita europe n.V. Makita corporation 3-11-8, sumiyoshi-cho, anjo, aichi 446-8502 japan jan-baptist vinkstraat 2, 3070 kortenberg, belgium 885606-229 en 20170508.
