Makita DJR187 Instruction Manual

Other manuals for DJR187: Instruction Manual, Instruction Manual
Manual is about: Cordless Recipro Saw

Summary of DJR187

  • Page 1

    Instruction manual cordless recipro saw djr187 eng lish: o rig in al in stru cti on s read before use..

  • Page 2: Specifications

    2 english specifications model: djr187 length of stroke 32 mm strokes per minute high (2) 0 - 3,000 min -1 low (1) 0 - 2,300 min -1 max. Cutting capacities pipe 130 mm wood 255 mm rated voltage d.C. 18 v battery cartridge bl1815n, bl1820, bl1820b bl1830, bl1830b, bl1840, bl1840b, bl1850, bl1850b, bl...

  • Page 3: Tions For Future Reference.

    3 english general power tool safety warnings warning: read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instruc- tions for future reference. The term "power tool" in the warni...

  • Page 4: Save These Instructions.

    4 english 3. When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery termi- nals together may cause burns or a fire. 4. Under abusi...

  • Page 5: Save These Instructions.

    5 english save these instructions. Caution: only use genuine makita batteries. Use of non-genuine makita batteries, or batteries that have been altered, may result in the battery bursting causing fires, personal injury and damage. It will also void the makita warranty for the makita tool and charger...

  • Page 6

    6 english indicating the remaining battery capacity only for battery cartridges with "b" at the end of the model number 1 2 fig.3 ► 1. Indicator lamps 2. Check button press the check button on the battery cartridge to indi- cate the remaining battery capacity. The indicator lamps light up for few se...

  • Page 7: Assembly

    7 english lighting up the front lamp 1 fig.6 ► 1. Lamp caution: do not look in the light or see the source of light directly. Pull the switch trigger to light up the lamp. The lamp keeps on lighting while the switch trigger is being pulled. The lamp goes out approximately 10 seconds after releasing ...

  • Page 8: Operation

    8 english 2 1 3 fig.9 ► 1. Blade clamp lever 2. Released position 3. Fixed position insert the recipro saw blade into the blade clamp as far as it will go. The blade clamp sleeve rotates and fixes the recipro saw blade. Make sure that the recipro saw blade cannot be extracted even though you try to ...

  • Page 9: Maintenance

    9 english maintenance caution: always be sure that the tool is switched off and the battery cartridge is removed before attempting to perform inspection or maintenance. Notice: never use gasoline, benzine, thinner, alcohol or the like. Discoloration, deformation or cracks may result. To maintain pro...

  • Page 10

    10

  • Page 11

    11.

  • Page 12

    Www.Makita.Com makita jan-baptist vinkstraat 2, 3070, belgium makita corporation anjo, aichi, japan 885449a229 en 20151215.