- DL manuals
- Makita
- Cordless Saw
- UC170D
- Instruction Manual
Makita UC170D Instruction Manual
Summary of UC170D
Page 1
I n s t r u c t i o n m a n u a l warning: for your personal safety, read and understand before using. Save these instructions for future reference. W w w . M a k i t a t o o l s . C o m cordless pvc saw model uc170d 002270
Page 2: Specifications
2 specifications • manufacturer reserves the right to change specifications without notice. • specifications may differ from country to country. Inportant safety instructions usa014-1 warning: when using a cordless pvc saw, basic safety precautions should always be followed to reduce the risk of fir...
Page 3
3 4. Keep children away do not let visitors contact saw. All visitors should be kept away from work area. 5. Store idle saw when not in use, saws should be stored in a dry, and high or locked-up place - out of the reach of children. When storing saw, use a scabbard or carrying case. 6. Do not force ...
Page 4: Save These Instructions
4 running. Use a firm grip with thumbs and fingers encircling the saw han- dles. (2) do not over reach. (3) keep proper footing and balance at all times. (4) do not let the nose of the guide bar contact ground or other obstruction. (5) do not cut above shoulder height. (6) use devices such as specia...
Page 5
5 bar tip guard - an attachment that may be provided on the end of the guide bar to prevent the chain at the end of the guide bar from contacting the wood. Saw powerhead - a saw without the saw chain and guide bar. Drive sprocket or sprocket - the toothed part that drives the saw chain. Front handle...
Page 6: Charger & Battery Cartridge
6 replacement saw chain - a chain that complies with the kickback performance require- ments of ansi b175.1 when tested with specific saws. It may not meet the ansi perfor- mance requirements when used with other saws. Saw chain - a loop of chain having cutting teeth, that cut the pvc tubing and tha...
Page 7: Battery Cartridge
7 9. Do not operate charger with damaged cord or plug - replace them immediately. 10. Do not operate charger if it has received a sharp blow, been dropped, or otherwise damaged in any way; take it to a qualified serviceman. 11. Do not disassemble charger or battery cartridge; take it to a qualified ...
Page 8: Functional
8 functional description caution: • always make sure that the tool is switched off and the battery cartridge is removed before adjusting or checking function on the tool. Installing or removing battery cartridge • always switch off the tool before insertion or removal of the battery cartridge. • to ...
Page 9
9 note: • the battery charger is for charging makita battery cartridge. Never use it for other purposes or for other manufacturer’s batteries. • when you charge a new battery cartridge or a battery cartridge which has not been used for a long period of time, it may not accept a full charge. This is ...
Page 10: Switch Action
10 switch action caution: • before inserting the battery cartridge into the tool, always check to see that the switch trigger actuates properly and returns to the “off” position when released. To prevent the switch trigger from being accidentally pulled, a lock-off button is provided. To start the t...
Page 11: Adjusting Saw Chain Tension
11 while pushing the guide bar against the tool, slide the bar towards the sprocket till it stops. Keeping the guide bar in the position, tighten the bolt to secure the guide bar for easy saw chain replacement. Remove the saw chain by disengaging it from the sprocket. To install the saw chain, first...
Page 12
12 note: • a fresh saw chain is apt to become loose on the guide bar. Therefore, it is recommended to check the saw chain tension occasionally while it is fresh. A poorly strained saw chain can slip off the guide bar. Keep saw waste, dust or dirt away from the place where you will install/remove saw...
Page 13: Operation
13 while pushing the guide bar against the tool, slide the bar towards the sprocket till it stops. And then tighten the bolt firmly. Operation caution: • keep all parts of the body away from the saw chain when the motor is running. • hold the saw firmly with both hands when the motor is running. • d...
Page 14: Carrying Tool
14 • do not continue operation any longer when the first battery gets empty because continuous operation using more than a battery will result in a burnt motor. • be sure to keep the bumper in contact with the workpiece till a cut is finished. If not, the tool will be naturally pulled in the directi...
Page 15: Maintenance
15 maintenance caution: • always be sure that the tool is switched off and the battery cartridge is removed before attempting to perform inspection or maintenance. • always wear gloves when performing any inspection or maintenance. Cleaning guide bar sometimes the groove on the guide bar may be clog...
Page 16: Accesaries
16 call your nearest makita service center or distributor to determine the location that provides makita battery recycling. See your local yellow pages under “tools-electric”. Accesaries caution: • these accessories or attachments are recommended for use with your makita tool specified in this manua...
Page 17: Makita U.S.A., Inc.
17 first-class postage required post office will not deliver without proper postage. Makita u.S.A., inc. 14930 northam street la mirada, ca 90638-5753 fold cut.
Page 18: Mail This Portion
18 1. This product was purchased from: home center hardware/lumber store tool distributor industrial supply construction supply other ( ) 3. How did you learn about this product: magazine from dealer newspaper store display catalog radio exhibition from friend previous usage other ( ) 2. Use of the ...
Page 19: Factory Service Centers
19 factory service centers 1-800-4-makita retain this portion for your records arizona 3707 e. Broadway rd., ste. 6 phoenix, az 85040 (602) 437-2850 california 41850 christy st. Fremont, ca 94538-5107 (510) 657-9881 14930 northam st. La mirada, ca 90638-5753 (714) 522-8088 1970 fulton avenue sacrame...
Page 20: Warning
Warning some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the state of california to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: • lead from lead-based paints, • crystalline ...