Makita UC3041A Instruction Manual - Specifications
2
ENGLISH (Original instructions)
SPECIFICATIONS
Model UC3041A
UC3541A
UC4041A
Max. chain speed
14.5 m/s (870 m/min)
Bar length
300 mm
350 mm
400 mm
Cutting length
265 mm
325 mm
360 mm
Standard guide bar
Guide bar type
Sprocket nose bar
Type
90PX 91PX 90PX 91PX 90PX 91PX
Pitch 3/8"
Standard saw chain
No. of drive links
46
52
56
Recommended guide bar length
300 - 400 mm
Overall length (without guide bar)
455 mm
Net weight
4.6 kg
4.7 kg
4.7 kg
Extension cable (optional)
DIN 57282/HO 7RN -F L=30 m max.,3x1.5 mm
2
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
END218-7
Symbol
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
・ Read instruction manual and follow the
warnings and safety instructions.
・ Wear eye protection.
・ Wear ear protection.
・ DOUBLE
INSULATION
・ Caution: particular care and attention
required!
・ Caution: withdraw the mains plug
immediately if the cable is damaged!
・ Caution:
kickback!
・ Protect against rain and damp!
・ Wear a helmet, goggles and ear
protection!
・ Wear
safety
gloves!
・ Withdraw the mains plug!
・ First
aid
・ Maximum permissible length of cut
・ Direction of chain travel
・ Chain
oil
・ Chain brake released
・ Chain brake applied
・ Prohibited!
・ Only for EU countries
Do not dispose of electric equipment
together with household waste
material!
In observance of the European
Directive, on Waste Electric and
Electronic Equipment and its
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an environmentally compatible
recycling facility.
ENE085-1
Intended use
The tool is intended for cutting lumbers and logs.
ENF002-2
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated and can, therefore, also be used
from sockets without earth wire.
ENF100-1
For public low-voltage distribution systems of
between 220 V and 250 V.
Switching operations of electric apparatus cause
voltage fluctuations. The operation of this device under
unfavorable mains conditions can have adverse effects