Media-tech HELLSTORM MT1508 User Manual
¯ If your system doesn’t launch the installation
software automatically, please fi nd the auto ex-
ecute fi le “setup.exe”, which is located under the
directory of your CD drive and click on it, then
follow the on-screen instruction to install the
HELLSTORM MT1508.
¯ Upon completing software installation, restart
your PC.
Hardware Installation
¯ Plug-in your HELLSTORM MT1508 connector to
either one USB Port or USB Hub of your comput-
er and make sure it is fi rmly connected.
¯ After the HELLSTORM MT1508 is connected, the
monitor will shows “Find a new hardware” and
the standard USB driver will be located for you
to fi nish the easy installation and play games im-
mediately.
¯ The system will add an item of stick in the game-
controller board automatically, and you can test
the function of gamepad buttons and vibration.
Troubleshoting
HELLSTORM MT1508 is properly plugged into
the USB port but does not work.
1. Please remove HELLSTORM MT1508 and all
other game drivers from the system and install
software drive once again. Sometimes there is a
confl ict between foreign drivers.
If you plug HELLSTORM MT1508 in to passive
USB hub and HELLSTORM MT1508 does not work
please plug in to active USB hub or direct USB
port in your computer.
2. Not every game requires all functioning buttons
(12 buttons) on your HELLSTORM MT1508. If you
fi nd some buttons no working inside the game,
please check the game setting again.
3. The function of the gamepad buttons may vary
in diff erent games. Before proceed with game
setting, whatever through the HELLSTORM
MT1508 or from the OPTION inside the game,
always read your game manual carefully to ap-
proach the best game setting.
4. Gamepad buttons confi guration depends from
game type. Please read game manual for game
devices support.
Introduction
Thank you for choosing the HELLSTORM MT1508
Gamepad. This device is an advanced game con-
trol system designed with full ergonomics and
equipped with well-positioned buttons to ensure
your game play comfortably. Moreover it is built
with two motors for actual vibration while playing
games.
In order to fi t your game play, please take a moment
to read the user’s guide. This user’s guide provides
you the necessary information for easily installing
and basic operating this powerful gamepad under
Microsoft Windows XP, Vista and Windows 7.
Package Contents
Your package comes with the following items:
¯ HELLSTORM MT1508 gamepad
¯ Software disc
¯ User’s guide
System Requirements
¯ IBM PC 586/Pentium II compatibles or higher
¯ Available USB port or extension active USB hub
¯ CD-ROM drive
¯ Microsoft Windows XP/Vista/Win 7
Installation
Attention: Always install the software fi rst be-
fore hardware installation.
Software Installation
Disc which comes together witch HELLSTORM
MT1508 contains the software needed for your
device setup. However, if you don’t install this
driver, HELLSTORM MT1508 will be operated
without vibration function.
¯ Insert driver CD disc into your CD-ROM drive and
wait for a few seconds for your computer to load
the disc.
¯ If your system is setup to automatically read a
new inserted CD, then the auto run program is
executed and the opening screen for installation
appears. Please follow the on-screen instruction
to install the drivers step-by-step.
EN
HELLSTORM
User’s Guide
Gamepad for PC Computers & PS3 Consoles
MT1508