Summary of MT4158
Page 1
User manual dvb-t2 digital tv box quality of digital television mt4158.
Page 2: Index
2 en index index ................................................................................................ 2 introduction .................................................................................. 3 front panel..............................................................................
Page 3: Introduction
3 en introduction front panel rear view.
Page 4: Remote Control
4 en 1. Standby on/off 2. Info (active channel information) 3. Play 4. Previous / next 5. Pause / timeshift 6. Menu (otwórz/zamknij okno menu) 7. Vol- (volume down) / vol+ (volume up) / ch- (previous channel) / ch+ (next channel) / menu navigation (left, right, up, down) 8. Ok (confi rm option) 9. R...
Page 5: Hardware Confi Guration
5 en hardware confi guration the mt4158 tuner can work with several devices. Most common confi gurations are shown below. Connecting tuner to a tv connect tuner to your tv with scart cable or composite cable as shown below. Connecting with hi-fi audio system.
Page 6: Software Confi Guration
6 en software confi guration startup menu if you fi rst time turn on tuner there will be shown “wel- come” menu then with navigation keys setup major options: region, language, display mode, as- pect mode and confi rm with “ok”. Automatic channel scanning (auto scan) 1. Select „auto scan” option and...
Page 7: Watching Tv
7 en aerial adjustment 1. Choose „aerial adjustment” menu and press “ok”. 2. Switch between „tuner power” – on/off. When this option is turned “on” there is +5v voltage on anten- na socket. If you do not use aerial that requires +5v power supply set this option to “off ”. Logical channel number when...
Page 8: System Properties
8 en tv channel list 1. Choose „edit channel” menu and select „tv channel list” option by pressing ok. 2. Use up/down keys to select proper channel and press ok to show channel view. 3. Use color buttons on remote to access available op- tions: „lock” – to lock the channel position, „skip” – to mark...
Page 9
9 en changing language this option allows to change the language of menu, audio track, subtitles and teletext. Tv system settings ¯ „display mode” - available options: pal/ntsc/auto ¯ „aspect mode” (screen proportions): auto / 4:3ps / 4:3lb / 16:9 ¯ „video output” – available options: cvbs / rgb ¯ „...
Page 10
10 en timer setting ¯ „timer mode” – available options: „off”/„once”/ „daily” ¯ „timer service” (set type of action): „channel” (pre- view selected channel)/„record” (recording selected channel). ¯ wakeup channel: choose channel that will be viewed after wake up. ¯ wakeup date: press ok and enter th...
Page 11
11 en favorite channel group in this menu you can rename your favorite channel group. 1. In the „channel menu” select „favorite” option and press ok. 2. Choose the group with directional keys and press ok. Using on-screen keyboard enter new name of the group. Select ok on the screen. 3. To leave men...
Page 12: Games
12 en software upgrade 1. In the “tools” menu select „s/w upgrade by ota” or „upgrade by usb” option and press ok. 2. Choose „upgrade fi le” and select the fi rmware fi le. 3. Select „start” and press ok. 4. To leave menu press exit. Removing usb device in the „tools” menu select „remove usb device ...
Page 13
13 en recording and external media devices 1. Press menu button on remote to enter main menu. 2. Highlight „rec & media” using up/down keys, press right button to enter. 3. Select submenu with up/down keys and press ok. 4. To leave menu press exit. Explore external usb device - media player 1. In th...
Page 14
14 en usb storage device information 1. Select „dvr hdd information” option in the „rec & media” menu and press ok. 2. To leave menu press exit. Usb hdd formatting 1. Select „hdd format” in the „rec & media” menu and pres ok. 2. Use up/down keys to select „storage partition” op- tion and choose prop...
Page 15
15 en note! Option „ps” is available for auditions broad- casted in mpeg-2 only. Jump time settings using this option you can set up of jump time value us- ing prev / next buttons. ¯ select “jump” option in the „rec & media” menu and press ok. ¯ use left/right keys to choose a value of time: 30sec, ...
Page 16: Troubleshooting
En troubleshooting technical specifi cation trouble cause solution standby indicator did not light power cord is not plugged in burnout fuse check the power cord contact with service out of signal antenna is not connected to receiver incorrect direction of an- tenna or antenna damaged check aerial c...