Media5 Mediatrix C710 Hardware Installation Manual - About This Manual

Manual is about: Mediatrix C7 Series

Summary of Mediatrix C710

  • Page 1

    Discover the power of 5 pb rohs compliant 2002/95/ec hardware installation guide mediatrix c7 series product version 2.0 document revision 02 march 27, 2013.

  • Page 2

    Media5 corporation hardware installation guide media5 corporation 4229 garlock street sherbrooke, québec, canada j1l 2c8 mediatrix c7 series hardware installation guide © 2013, media5 corporation all rights reserved. No part of this publication may be reproduced or used in any form or by any means –...

  • Page 3: Contents

    Hardware installation guide mediatrix c7 series iii contents preface about this manual ............................................................................................................. Vii introduction .........................................................................................

  • Page 4

    Contents iv mediatrix c7 series connecting cables .................................................................................................................................................... 11 chapter 3 powering on the mediatrix c7 series .......................................................

  • Page 5

    Hardware installation guide mediatrix c7 series v appendix c glossary............................................................................................................................. 33 appendix d list of acronyms .............................................................................

  • Page 6

    Contents vi mediatrix c7 series.

  • Page 7: About This Manual

    Mediatrix c7 series – digital gateway vii p r e f a c e p about this manual thank you for purchasing the mediatrix c7 series from media5 corporation. Introduction the mediatrix c7 series are multi-function devices combining voip analog adapter, gateway and qos control in a secure and powerful platfo...

  • Page 8: Document Objectives

    Preface - about this manual document objectives viii mediatrix c7 series – digital gateway document objectives the mediatrix c7 series hardware installation guide provides technical information on how to physically install the mediatrix c7 series. It also describes the cabling required for the media...

  • Page 9: Document Structure

    Document structure hardware installation guide mediatrix c7 series – digital gateway ix document structure the mediatrix c7 series hardware installation guide contains the following information. Table 2: mediatrix c7 series hardware installation guide chapter/appendices title summary “chapter 1 - ov...

  • Page 10: Document Conventions

    Preface - about this manual document conventions x mediatrix c7 series – digital gateway document conventions the following information provides an explanation of the symbols that appear on the mediatrix c7 series and in the documentation for the product. Warning definition where to find translated ...

  • Page 11: Obtaining Documentation

    Obtaining documentation hardware installation guide mediatrix c7 series – digital gateway xi obtaining documentation these sections explain how to obtain documentation from media5. Media5 web site media5 offers the latest version of its products’ documentation on its web site. You will thus be able ...

  • Page 12

    Preface - about this manual end user technical support xii mediatrix c7 series – digital gateway.

  • Page 13: Overview

    Mediatrix c7 series – digital gateway 1 c h a p t e r 1 overview this chapter describes the mediatrix c7 series connectors and indicators. Overview provider-specific profiles ensure that the mediatrix c7 series is a genuine plug and play solution. It offers a low total cost of ownership as it reduce...

  • Page 14

    Chapter 1 - overview mediatrix c7 series connectors and indicators 2 mediatrix c7 series – digital gateway front indicators and connectors see “indicators (leds)” on page 16 for a description of the led patterns the mediatrix c7 series may have and the states they represent. Figure 1 shows the five ...

  • Page 15

    Mediatrix c7 series connectors and indicators hardware installation guide mediatrix c7 series – digital gateway 3 table 4 describes the rear panel connections (from left to right). Table 4: rear connections of the mediatrix c7 series connection description 1. Power connector external 12 vdc power su...

  • Page 16

    Chapter 1 - overview mediatrix c7 series connectors and indicators 4 mediatrix c7 series – digital gateway.

  • Page 17: Installation

    Mediatrix c7 series – digital gateway 5 c h a p t e r 2 installation this chapter describes the installation of the mediatrix c7 series. Planning the installation before installing the mediatrix c7 series, you should complete the following tasks: create a network diagram (see section “network diagra...

  • Page 18

    Chapter 2 - installation planning the installation 6 mediatrix c7 series – digital gateway site log media5 recommends that you maintain a site log to record all actions relevant to the mediatrix c7 series, such as: installation: print a copy of the installation checklist and insert it into the site ...

  • Page 19: Safety Recommendations

    Safety recommendations hardware installation guide mediatrix c7 series – digital gateway 7 safety recommendations the following are safety recommendations and best practices to follow when working with the mediatrix c7 series. Maintaining safety with electricity general safety practices follow these...

  • Page 20: Unpacking and Inspection

    Chapter 2 - installation required mounting tools and equipment 8 mediatrix c7 series – digital gateway required mounting tools and equipment you will need the following tools and parts to properly install the mediatrix c7 series: esd-preventive wrist strap. In addition, you might need the following ...

  • Page 21

    Location and mounting requirements hardware installation guide mediatrix c7 series – digital gateway 9 wiring requirements make sure that the telephone wiring, lan and wan cables reach the device and can be dressed in a manner that is safe for the wiring, does not pull or create lateral stress on th...

  • Page 22

    Chapter 2 - installation location and mounting requirements 10 mediatrix c7 series – digital gateway wall-mounting to wall-mount the mediatrix c7 series: 1. Disconnect all of the cables from the mediatrix c7 series before mounting. 2. Ensure that the wall you are using is smooth, flat, dry and sturd...

  • Page 23: Hardware Installation

    Hardware installation hardware installation guide mediatrix c7 series – digital gateway 11 hardware installation this section describes how to set the connectors of the mediatrix c7 series. See “appendix b - cabling considerations” on page 29 for more details on the cables the mediatrix c7 series us...

  • Page 24

    Chapter 2 - installation hardware installation 12 mediatrix c7 series – digital gateway use a standard telecommunication cord with a minimum of 26 awg wire size. You can either use a crossover or straight ethernet cable because it performs automatic mdi / mdix detection. See “rj-45 cable” on page 29...

  • Page 25: Powering On The Mediatrix C7

    Mediatrix c7 series – digital gateway 13 c h a p t e r 3 powering on the mediatrix c7 series this chapter describes the initial provisioning of the mediatrix c7 series. Ip address discovery or configuration this section describes how to contact the mediatrix c7 series's management interface to start...

  • Page 26

    Chapter 3 - powering on the mediatrix c7 series ip address discovery or configuration 14 mediatrix c7 series – digital gateway 8. The mediatrix c7 series should be already running. If not, power it on by connecting the other end of the power adaptor to an electrical earthed socket-outlet. The electr...

  • Page 27

    Ip address discovery or configuration hardware installation guide mediatrix c7 series – digital gateway 15 this procedure is called a partial reset. After a partial reset is performed, the mediatrix c7 series uses the default ip address 192.168.0.1/24. Refer to “partial reset” on page 19 for details...

  • Page 28: Indicators (Leds)

    Chapter 3 - powering on the mediatrix c7 series indicators (leds) 16 mediatrix c7 series – digital gateway verifying the installation there are a few ways to verify that the mediatrix c7 series is properly connected to the ip network and is working: by contacting it with a snmp browser by contacting...

  • Page 29

    Indicators (leds) hardware installation guide mediatrix c7 series – digital gateway 17 led patterns – default behaviour when no specific condition matches those described in table 6 , the leds behave individually according to the following rules: updateinprogress a firmware pack is downloaded into t...

  • Page 30: Reset/default Button

    Chapter 3 - powering on the mediatrix c7 series reset/default button 18 mediatrix c7 series – digital gateway reset/default button the reset/default button allows you to: cancel an action that was started. Revert to known factory settings if the mediatrix c7 series refuses to work properly for any r...

  • Page 31

    Reset/default button hardware installation guide mediatrix c7 series – digital gateway 19 at start-time you can use the reset/default button at start-time – you power the unit off, and then depress the button until the leds stop blinking and remain on. This applies the “factory reset” procedure (see...

  • Page 32: Management Choices

    Chapter 3 - powering on the mediatrix c7 series management choices 20 mediatrix c7 series – digital gateway to trigger the factory reset: 1. Power the mediatrix c7 series off. 2. Insert a small, unbent paper clip into the reset / default hole located at the rear of the mediatrix c7 series. While pre...

  • Page 33: Standards Compliance and

    Mediatrix c7 series – digital gateway 21 a p p e n d i x a standards compliance and safety information this appendix lists the various standards compliance of the mediatrix c7 series. Standards supported the mediatrix c7 series complies to the following standards: table 10: standards compliance cate...

  • Page 34: Disclaimers

    Appendix a - standards compliance and safety information disclaimers 22 mediatrix c7 series – digital gateway disclaimers the following are the disclaimers related to the mediatrix c7 series. Ce marking declaration of conformity we media5 corporation, located at 4229 garlock st. Sherbrooke, québec, ...

  • Page 35

    Disclaimers hardware installation guide mediatrix c7 series – digital gateway 23 rohs china.

  • Page 36

    Appendix a - standards compliance and safety information disclaimers 24 mediatrix c7 series – digital gateway altitude of operation translated from chinese as "used only at altitudes not more than 2000m above sea level" or similar..

  • Page 37

    Translated warning definition hardware installation guide mediatrix c7 series – digital gateway 25 translated warning definition the following information provides an explanation of the symbols which appear on the mediatrix c7 series and in the documentation for the product. Waarschuwing: dit waarsc...

  • Page 38: Safety Warnings

    Appendix a - standards compliance and safety information safety warnings 26 mediatrix c7 series – digital gateway safety warnings this section lists the following safety warnings: circuit breaker (15a) warning tn power warning product disposal warning no. 26 awg warning eth2, eth1, and fxs connector...

  • Page 39: Safety Recommendations

    Safety recommendations hardware installation guide mediatrix c7 series – digital gateway 27 circuit breaker (15a) warning tn power warning product disposal warning no. 26 awg warning eth2, eth1, and fxs connectors warning socket outlet warning safety recommendations to insure general safety follow t...

  • Page 40

    Appendix a - standards compliance and safety information safety recommendations 28 mediatrix c7 series – digital gateway unsafe. Caution: when using this equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the foll...

  • Page 41: Cabling Considerations

    Mediatrix c7 series – digital gateway 29 a p p e n d i x b cabling considerations this appendix describes the pin-to-pin connections for cables used with the mediatrix c7 series. Rj-45 cable the rj-45 connector is commonly used for network cabling and for telephony applications. It is used to wire b...

  • Page 42

    Appendix b - cabling considerations rj-45 cable 30 mediatrix c7 series – digital gateway straight through cable a rj-45 straight through cable is used to connect a computer to a network device. For instance, you must use straight through cables to connect a computer to a network hub, switch, and rou...

  • Page 43

    Rj-45 cable hardware installation guide mediatrix c7 series – digital gateway 31 crossover cable a rj-45 crossover cable is used when only two systems are to be connected to each other, peer to peer, at the ethernet cards by “crossing over” (reversing) their respective pin contacts. An example would...

  • Page 44: Rj-11 (Telephone) Cable

    Appendix b - cabling considerations rj-11 (telephone) cable 32 mediatrix c7 series – digital gateway rj-11 (telephone) cable the rj-11 cable is commonly used for telephone connection. Wiring conventions for telephone connections, a cable requires one pair of wires. Each wire is identified by differe...

  • Page 45: Glossary

    Mediatrix c7 series – digital gateway 33 a p p e n d i x c glossary 10 baset an ethernet local area network that works on twisted pair wiring. 100 baset a newer version of ethernet that operates at 10 times the speed of a 10 baset ethernet. Domain name server (dns) internet service that translates d...

  • Page 46

    Appendix c - glossary media access control (mac) address 34 mediatrix c7 series – digital gateway media access control (mac) address a layer 2 address, 6 bytes long, associated with a particular network device; used to identify devices in a network; also called hardware or physical address. Network ...

  • Page 47

    Wide area network (wan) hardware installation guide mediatrix c7 series – digital gateway 35 wide area network (wan) a large (geographically dispersed) network, usually constructed with serial lines, that covers a large geographic area. A wan connects lans using transmission lines provided by a comm...

  • Page 48

    Appendix c - glossary wide area network (wan) 36 mediatrix c7 series – digital gateway.

  • Page 49: List of Acronyms

    Mediatrix c7 series 37 a p p e n d i x d list of acronyms awg american wire gauge ce cummunauté européenne (french) dhcp dynamic host configuration protocol dns domain name server ietf internet engineering task force lan local area network mac media access control mdi media dependent interface mdix ...

  • Page 50

    Appendix d - list of acronyms 38 mediatrix c7 series.

  • Page 51: Index

    Mediatrix c7 series 39 index numerics 10 baset 3 , 11 , 29 defined 33 see also cabling 100 baset 3 , 11 , 29 defined 33 see also cabling a acronyms 37 audience, intended viii auto mdi/mdix 29 b bypass connection connecting 11 c cables connecting 11 cabling rj-11 32 rj-45 crossover 31 pin name 30 pin...

  • Page 52

    Index 40 mediatrix c7 series mdi/mdix, auto 29 media5 download portal xi media5 web site xi mounting on a wall 10 o objectives of document viii operating temperature 8 overview of the product 1 p partial reset 19 see also factory reset product models 1 product overview 1 provisioning initial sequenc...