Remote control user manual x555u.
Add a remote controller step1 ： choose the appliance type of the remote controller which you need to add; step2: choose the brand of the appliance; step3 ： as the prompt, turn off the appliance first and click the power on button , if appliance turned on, select ‘has response’ , if not , select ‘no ...
Manage the controller after one appliance is added , click the icon on top right corner of the interface to change the skin of the remote controller , or add/remove the current controller in/from widgets at standby , or re-layout the controller , or edit it’s ir button, or rename the appliance, or d...
Manage the rooms/appliances click the icon on top left corner of the interface to see all appliances which are added in current room , and you may switch the current remote controller by click the appliance directly; if you need to add more appliance, please click the add icon below the appliances’ ...
More click the icon to enter the personal and system settings interface, and you may get the latest upgrade here ;.
Diy flow step1 ： click the diy icon on right top corner to enter the diy remote interface; step2: you may change the appliance’s type in remote type; step3 ： click ‘start diy’ button to customize the control button one by one ；.
To receive infrared signal step 4 ： please make sure the infrared ports on the phone and the ir controller is aligned and the distance between them is less than 30mm. Step 5 ： press the button of the remote controller to send the signal while smartphone is listening ；.
Infrared signal detected step6 ： after infrared signal detected ， you may define the signal as you wanted..
Define your controller step 7: when you have collected enough key signal, click ‘done’ to add some details to the controller and save it..
