1. Introduction thanks for choosing wifi bridge product. With this portable device, ip camera and other it products with ethernet rj45 port can access wireless network easily. Two kinds of application topology of are shown as below..
2. Setup please set this wifi bridge before using it, you can connect it to pc and run the autorun.Exe in the cd. The physical connection for setup as below:.
Running the setupwizard 1) please put into the cd-rom, the systerm will automatically eject the disk and guide page, please refer to the right picture and click the corresponding label. 2) please click install software label to run the set up program, if it’s shown the right picuture, please click n...
3) if it’s shown the right picture, please click yes to install winpcap program. 4) please click next, don’t need to do other settings until finish..
5) after the installation is complete, please double click the desktop icon , the right picture shows it is searching the product mac. 6) the right picture shows it is complete to search mac, please click next..
7) the right picture shows the product has searched thewifi network,please choose the correct wifi network. Wpa wpa automatically uses tkip with dynamic encryption keys. Enter a passphrase on this screen. Encryption - tkip is automatically selected as the encryption method. Click next to proceed, or...
8 ） the new settings will be shown. Click next to save your new settings. 9 ） wifi bridge will attempt to connect the wireless network with the new settings. Make sure the bridge’s wireless led is solidly lit or flashing. This indicates that the bridge has connected to the wireless network. If the a...
11) the right picture shows the product to obtain the gateway router successfully completed all the configurations to this, please click successfully associated to wireless icon, then click exit to exit the installationwizard. To make sure wifi bridge is working, cut off all other internet connectio...
