MediaPoint DMR HD User Manual - Recording and Streaming

DMR HD  |

15

4

Recording, Archiving & Streaming

Recording and Streaming

A streaming/recording session can be started and

stopped from the Record section of the main toolbar

and from the profile listing. The “default” profile will

be used unless another profile is selected. To select an

alternate profile, use the Change button to bring up a

profile listing.

The RED LED will illuminate when the DMR HD is

recording/streaming and the Web Portal will display

a “Recording” message at the top of the page. The

record/stream parameters will be as specified in the

profile that was chosen.

To stop the recording and create an archived file, press

the Stop button to begin the “indexing” process. The 

RED LED on the front of the unit will blink fast during

the indexing procedure, indicating that the unit is 

busy and cannot record or stream until the process is 

complete.  Depending on the length of the archived 

material, this could take a few seconds up to several 

minutes to complete.

Changing Profiles 

While in the Record page, you can click on the Change

icon and you will get a list pop-up with all of the 

available profiles. You can simply point and select on

the profile of your choice and the Record page will

automatically be updated.