Mediastar Evolution 780 Quick Start Manual - page 5
Quick Start Guide
Product Specification
Feature
780 support
Physical
165 x 95 x 31mm, 220g
Ambient operating temperature range
0º - 40º Centigrade
Power
5VDC, 8W, 10W for Power over Ethernet variant
Power Supply
Input: 100-240VAC, 47-63Hz
Output: +5VDC (+/- 5%), 2.0 - 3.5 Amps, with a DC jack plug
(centre positive voltage, 2.5/5.5mm)
LAn
10/100 Base-T, Auto MDIX, Power over Ethernet Powered Device (PD)
Composite Output
PAL/nTSC
HDMI, YPbPr/RGB
480i, 480p, 576i, 576p, 720p, 50, 60Hz, 1080i, 50, 60Hz
(25, 30 frames per second)
HDMI Stereo
Single channel stereo digital audio
Analogue Audio
Stereo (2.2V pk-pk into a 10K Ohm load)
USB
1 x USB 2.0 high Speed Host
USB Device Support
Memory Stick (for software and Media upgrades only)
Keyboard, Mouse
Integrated IR Receiver
Yes
External IR Receiver
911-4141 Order separately
Infra-Red Remote Control Unit
791/3W Order separately
Ancillary Port
Control interface to external 1/0 devices
RS232 Port
Rx, Tx. CTS, RTS up to 115200 Baud
Medias
tar E
volution
are BnC, DVI, HDMI, AV and Component (appropriate to
the display). Video output blanking is also supported.
On/Off Control - allows the display device to be set to
switch on or off at a specific time each day.
Date/Time - allows setting of correct date and time
including connection to a nTP Time Server if accessible
via the network.
Update Locations - specify where the unit will look
for software updates, media files and centralised unit
configuration files.
SNMP - allows configuration of SnMP community and
trap targets.
Email Logs - configuration of who log files are emailed
to and when.
Event Log - displays a list of events generated by the
unit.
Media Files - shows a list of files stored locally on xGB
units.
Display Control - change channel, volume, mute,
brightness, contrast and hue.
Set 780 Unit Password - a password may be set to
prevent the unauthorised modification of the 780
configuration. A password must consist of exactly six
digits from 0-9. If a password gets lost, contact Cabletime
for assistance.
Enablement - enter enablement codes here to reconfigure
or expand the capabilities or your unit. Details can be
obtained from your reseller or Cabletime.
5
PART nO. 200-2390
780QSG_v2