Medic Spa MATRIX 1000 User Manual - Troubleshooting
TROUBLESHOOTING
PROBLEM
SYMPTOM
&+(&.7+,6
REMEDY
No power
Display is dim or
will not light up.
Batteries
are
exhausted.
Replace with new
batteries
Batteries are inserted
incorrectly.
Insert the batteries
correctly
Low
batteries
Show on the
display
Batteries are low.
Replace with new
batteries
Error
massage
(VKRZV
The cuff is not secure Refasten the cuff and
then measure again.
E 2 shows
The cuff is very tight
Refasten the cuff and
then measure again.
(VKRZV
The pressure of the
cuff is excess.
Relax for a moment
and then measure
again.
(RU(VKRZV
The monitor detected
motion while measuring.
movement can affect
the measurement.Relax
for a moment and then
measure again.
(RU(VKRZV
Measure incorrectly.
Relax for a moment and
then measure again.
Eexx,shows on
the display.
A calibration error
occurred.
ʩ
Retake the measurement.
If the problem persists,
contact the retailer or
our customer service
department for further
assistance. Refer to
the warranty for contact
information and return
instructions.
MAINTENANCE
In order to get the best performance, please follow the below instructions.
Put in a dry place and avoid the sunshine
Avoid touching water, clean it with a dry cloth in case.
Avoid the intense shaking and collision
Avoid the dusty and unstabletemperature environment
Using the wet clothing to remove the dirt
Avoid washing the cuff
Instructions for correct replacement of interchangeable or detachable parts
VSHFL¿HGE\0$18)$&785(5DVUHSODFHDEOHE\6(59,&(3(56211(/