MedicalAlert SMOKE DETECTOR Setup Manual - Call 1-855-629-1795

5

SCREW MOUNT INSTALLATION

1)  Remove the adhesive mounting  

    plate by gently lifting the tab on  

    the mounting plate and sliding in  

    the opposite direction.  

2)  Using the mounting bracket as a  

      template, in each of the keyholes,  

    draw a mark for the mounting    

    plug and screw.

3)   Using the 2 screws and mounting plugs included, attach the 

       mounting bracket to the wall. 

4)   Line up the slot of the bracket and the smoke detector.  Push  

       the detector onto the mounting bracket and turn it clockwise to 

        fix in place.  Pull forward on the smoke detector to make sure it is 

       securely attached to the mounting bracket.

5)   Now that your smoke detector is installed, 

Call 1-855-629-1795

       to put your medical alarm unit on test for 30 minutes so you do 

       not create a False Alarm that could cause the Fire Department to    

       be dispatched unnecessarily.

INSTALLATION