- DL manuals
- Medifab
- Wheelchair
- Bingo Evaluion
- Manual Manual
Medifab Bingo Evaluion Manual Manual
Summary of Bingo Evaluion
Page 1
Therapist and carer manual please read before use bingo evolution medifab medical fabrication australia: 26 pardoe street, devonport, tas 7310 new zealand: 7 allens road, ashburton 7700 call: 1300 543 343 (au) 0800 543 343 (nz) www.Medifab.Com info@medifab.Com abn # 49 828 922 466.
Page 2
User manual for bingo evolution contents 1 common information __________________________________________________________________________ . 2 1.1 preface_________________________________________________________________________________ 2 1.2 application ________________________________________________...
Page 3
2 1 common information 1.1 preface thank you for selecting the bingo evolution wheelchair. We have designed this high-quality product to make your life safer and easier, and we’ve included this manual to help you use and care for it. Please read the follo- wing instructions to make sure you use this...
Page 4
3 2 safety instructions 2.1 meaning of symbols caution! Warning of possible danger of accident and injury. Warning of possible technical damage. Information! About use of the product. Information! For service-personnel. Attention! Read manual before use! 2.2 common safety instructions read manual co...
Page 5
4 pay particular attention when on slopes and inclines to prevent: - the child from falling out of the pushchair - the pushchair from tipping over - the pushchair from rolling away only lift the pushchair by parts that are solidly attached: - front frame tube above the front wheels - front axle - pu...
Page 6
5 caution! All upholsteries are hardly inflammable and meet the claim en 1021 part 1 (cigarette test) and part 2 (match test). But that doesn`t protect the user in the seat unit to suffer burnings by careless handling with blaze or open fire. Disposal of waste: the packaging material as far as metal, ...
Page 7
6 3 delivery and preparing for use the original package contains the following components: • mobility base, folded • seat unit and backrest folded • seat-, backrest-, hip- and lateral upholstery • instructions for use • accessories as ordered please remove the transport safety items and packaging ma...
Page 8
7 • turn the toggle lever on the backrest (6) and let engage the backrest in the first position. • pull the seat unit on the backrest to the back (7) until the mechanism of the tilt function engages hearable in the first position. The illustration (8) shows a bingo evolution with the backrest and the ...
Page 9
8 • cut the transport safety (cable connector) carefully. If your bingo evolution is equipped with an angle adjustable footrest hanger the footrest could be in a hinged position for the transport. • swing the footrest hanger with the footrest in the desired position and clamp it firmly with the clamp...
Page 10
9 the hip supports can be detached for the transport to achieve a compact folding size. • plug the hip supports on the brackets as shown (16). • pull the hip support upholstery from the top onto the bracket, so that the cushioned side points to the inner side and fix it with the velcro fasteners. The...
Page 11
10 • pull the lateral support upholstery onto the bracket, so that the cushioned side points to the inner side and fix it with the velcro fasteners. The illustration (22) shows a bingo evolution with inserted lateral support. • pull the backrest upholstery with the cap onto the backrest. • fix the ba...
Page 12
11 to fold the bingo evolution proceed as follows: • ensure the bingo evolution with the attendant brake. We suggest to achieve the most compact folding package: • to bring the seat angle into the 0° position (see 4.17) • to fold or to detach the lateral supports (see 4.6) • to drop off the hip supp...
Page 13
12 4.3 seat depth and seat width after loosening and removing of the marked screw connections (on both sides) it is possible to slide the seat plate. For a high stability the screw connections should have a wide distance to each other. Whenever you change any settings on the bingo evolution, make su...
Page 14
13 4.6 lateral support • the lateral supports can be detached for the transport. 4.7 thigh supports after loosening the wing nuts under the seat (32) it is possible to adjust the thigh supports concerning the depth and the width continuously variable (see 4.3). 4.8 back height • loose the wing nuts ...
Page 15
14 4.10 footrest hanger, angle adjustable • activate the wheel lock and position in front of the seat. Secure footrest and knee angle assembly with one hand before you loosen the toggle lever with the other hand. Swing the footrest to the desired position and tighten the toggle lever firmly again. 4....
Page 16
15 a b 4.14 foot rest lock (optional) by pulling the release ring, the foot rest can be folded upwards. When the foot rest is folded down, it will automatically lock into position. Whenever you change any settings on the bingo evolution, make sure that you firmly tighten any screws that have been loo...
Page 17
16 4.17 tilt in space the bingo evolution seat unit can be tilted up to 45°. • put on the wheel lock and stand beside the pushchair. • secure the seat unit with one hand holding onto the back rest. • pull the active handle until the locking bolts enable the tilt in space function and postion the sea...
Page 18
17 4.20 pneumatic tyres all wheels are equipped with pneumatic tyres. Maintain proper pressure at all times. Notice the air pressure indicated on the tyre. 5.1 swivel lock the swivel lock is mounted by the manufacturer or an authorized dealer. • to lock the swivel lock turn the lock pin by 90° and l...
Page 19
18 the bag is attached with velcro fasteners to fix it on the frame. • fix the velcro fasteners on the front frame as shown. • proceed in the same way on the other side. • fix the velcro fasteners on the rear frame as shown. • proceed in the same way on the other side. The soft accessory bag can be u...
Page 20
19 68 69 5.4 headrest pads the headrest pads are mounted with carriage bolts and knurled nuts on the back insert. • for an easy mounting and for adjustments open the zipper of the upholstery cap on the rear of the back and turn the rear head upholstery back..
Page 21
20 70 71 72 73 74 • for a rough adjustment of the headrest width the self adhesive foam pads are glued to the left and/or the right of the headrest brackets. • put on the cover. • after loosening the knurled nuts the headrest pads can be moved in or out for a fine width adjustment. • the height adjus...
Page 22
21 75 76 77 78 79 • close the zip as shown. Illustration 76 shows the mounted headrest pads (low version) inklusive upholstery. 5.6 universal headrest bracket (in connection with backrest until shoulder height only) the universal headrest bracket gets mounted on the backrest plate. After loosening t...
Page 23
22 the triangular pad guiding gets plugged from the back side the stamping in the pad guiding must be positioned into the long hole. At least 2 washer get plugged and the wing nut gets firmly tightened. After loosening the wing nut it is possible to adjust the trunk pad steplessly concerning the heig...
Page 24
23 5.10 4-point lap belt the assembly should be performed by trained technicians. By pressing the plug ends the lap belt opens. At the belt buckle the lap belt can be readjusted by adducting the lap ends (fine tuning). First the seat upholstery have to be removed. Then guide the triglides for the ten...
Page 25
24 • lead the shoulder straps together with the pad straps through the designated long holes in the back insert. Fix the shoulder straps to the slots in the back base as described in 5.9 lap belt. • tie the pad straps together. The shoulder straps should be adjusted in a way that the housing of the ...
Page 26
25 5.12 foot straps thread the foot straps crosswise through the d-rings over the shoe/ foot of your child. The heel should be placed against the heel plate of the footrest. Place the buckle always outward. Pull the free strap end to tighten the foot straps. Press the key on the buckle to open the b...
Page 27
26 thread the attachment straps of the groin strap between seat and back padding, wrap them around the back of the seat edge and attach with rectangle-rings, the screws and the washers under the seat plate. The assembly should be performed by trained technicians. To put on the groin strap proceed as...
Page 28
27 closing the fixation jacket: • place your child into the seat. • close the zipper. • spannen sie je nach bedarf die einzelnen fixationswestengurte in den klappschnallen nach. 5.16 chest-shoulder harness to attach the chest-shoulder harness, rivet (from inside to outside) the four cam-lock buckles ...
Page 29
28 make sure that the chest and shoulder pad is positioned symmetrically on the pelvis and close the buckles on the lower straps. • set the upper body of your child upright against the back. • finally, tighten the upper straps behind the seat and close the buckles on the upper straps. The fit and pos...
Page 30
29 to remove the grab rail please position edgewise to the wheelchair: take off the grab rail by pressing the snap buttons and pull the rail upwards. The cover is easy to remove by opening the zipper. 5.19 therapy tray insert the tray with the vertical round tubes into the retainer for accessories o...
Page 31
30 120 121 122 123 124 upper straps to the frame of the back insert. Lower straps to the lower area of the back base. 5.22 sheep skin insert after removing the upper side of the winter warmer the sheep skin insert gets inserted into the winter warmer. 5.23 rain cape with the zip-fastener open pull t...
Page 32
31 125 126 127 128 129 insert the male pins of the canopy into the canopy adapters on both sides. Adjustable ratchet joints are used to set the angle of the canopy. Spread the canopy and wrap over the backrest of the seat. Canopy with rain cover: take the rain cover out of the bag attached to the wr...
Page 33
32 tighten the counter nut firmly again and ensure that the crank of the set screw shows towards the rear frame, away from the tire. By adjusting the setscrews you can achieve an equable braking of the rear wheels. 5.26 drum brakes bingo evolution can be fitted with drum brakes too. The drum brakes ar...
Page 34
33 buggy- and kiddy board are applicable for children at the age of 2 years and resilient up to 20 kg. 5.28 sunshade bingo evolution can be supplied with a sunshade. For this purpose the adapter gets screwed above the folding mechanism optional on the left or the right side. The sunshade can be deta...
Page 35
34 6 transport 6.1 in the trunk (luggage space) of a car basically you can store your bingo evolution in the trunk of your car as well with or without seat unit on as well as with or without wheels on. To achieve the most compact folding package fold the backrest and remove the rear wheels. 6.2 usin...
Page 36
35 7 maintenance your bingo evolution rehab pushchair is ce approved. The manufacturer herewith guarantees that this medical product as a whole conforms to the requirements of the 93/42/eec guideline. The rehab pushchair should be checked for correct function before every use. The items listed in th...
Page 37
36 8 technical data dimensions (cm) and weights (kg) size 1 size 2 mobility base 3231-1000 rigid 3233-1000 rigid 3232-1000 swivel 3234-1000 swivel push handle height 75 -110 75 - 110 overall width 63 68 overall length mobility base rigid front wheels 96 96 overall length mobility base swivel front w...
Page 38
Thank you for choosing to work with medifab. We believe in shaping better lives through consistency of care. If there is anything that we can be of help with, please do not hesitate to contact the friendly team here. Medifab medical fabrication 7 – 9 allens road, ashburton 7700, new zealand 26 pardo...