MediPendant MED01 Quick Start Manual

Page of 8

Download

Print this page

Bookmark us

INSTALLING YOUR MediPendant™

This is for basic installation of your MediPendant™.Please see OWNER’S MANUAL

for full instructions, product details, warranties and disclaimers.

Model #MED01

MediPendant

™

STEP 1

Place the MediPendant™ base station on a stable surface located near a power outlet

and an available phone jack. For best results, locate the base station in an area away

from household appliances which could present electrical interference. See Fig. 1

If you are using more than one MediPendant™ system in your home, we recommend

that you place the base stations at least 15 ft. apart from each other.

STEP 2

Grab RED TAB located on side of base station and pull it straight out. Removing tab

activates back-up battery. See Fig. 2

Unit will beep continuously and the POWER LED and PHONE LINE INDICATOR LED

will both flash RED until AC/DC adapter is plugged in. See STEP 3.

Fig. 2

Fig. 1

Phone

Jack

Power

Outlet

QUICK START GUIDE

10 STEP

1 2 3 4 5 6 7 Next › »

Summary of MED01

Page 1
Installing your medipendant™ this is for basic installation of your medipendant™.Please see owner’s manual for full instructions, product details, warranties and disclaimers. Model #med01 medipendant ™ step 1 place the medipendant™ base station on a stable surface located near a power outlet and an ...
Page 2: Step 3
Step 3 connect the ac/dc adapter into the black plug in the back of the base station marked dc. See fig. 3 step 4 connect the other end of the ac/dc adapter into a standard power outlet. See fig. 4 once plugged in, your base unit will continue to beep and the red phone line indicator led will contin...
Page 3: Step 5
If you already have a telephone plugged into the telephone jack at the wall, unplug the telephone cord from the telephone jack in the wall and plug it into the grey plug on the back of the base station marked extra phone jack. Continue with step 5 and step 6. If installed properly, the red phone lin...
Page 4: Step 7
4 your medipendant™ system is now activated and ready for use. See owner’s manual for further instructions. Step 7 press and hold the large round grey button for 3 seconds on the front of the pendant. See fig. 7 you will hear the pendant say, “your emer- gency call is now being dialed, please stand ...
Page 5: Medipendant
5 ¿cómo instalar el medipendant™? Este manual es para la instalación básica de su medipendant™. Por favor lea el manual del usuario para obtener instrucciones detalladas, detalles del producto, garantías y renuncias. Modelo #med01 medipendant ™ paso 1 coloque la estación base del medipendant™ en una...
Page 6: Paso 3
6 paso 3 conecte el adaptador de corriente ac/dc dentro del enchufe negro en la parte posterior de la estación base marcada dc. Ver fig. 3 paso 4 conecte el otro extremo del adaptador de corriente ac/dc dentro de la salida de corriente de la pared. Ver fig. 4 una vez conectado, la base continuará em...
Page 7: Paso 5
7 si usted tiene un telÉfono enchufado en la salida de telÉfono de la pared, desconecte el cable de teléfono del enchufe de la pared y conéctelo en el enchufe gris en la parte posterior de la estación base que indica enchufe adicio- nal para telÉfono (extra phone jack). Continúe con los pasos 5 y 6....
Page 8: Paso 7
8 su sistema medipendant™ ha sido activado y estÁ listo para ser usado. Para mayor información, vea el manual del usuario paso 7 mantenga presionado el botón gris, grande y redondo que se encuentra en la parte frontal del pendiente por 3 segundos hasta que haga click. Ver fig. 7 usted escuchará al p...