Medquip Gentlefeed 2 MQ9100 Instructions & Assembly - Alarm Clock Mode
English 27
Alarm Clock Mode
It is advised to pump regularly in order to maintain a good milk supply from your body. The Alarm Clock Mode is
designed to remind you when it's time for your next pumping cycle. By keeping a regular expression pattern, your body
maintains a good milk supply. After setting the time interval between each pumping session, the Alarm countdown will
automatically start after the previous pumping cycle has stopped. An alarm will sound when the pre-set time has passed.
How to Adjust the Alarm:
1. 1. In Clock/Standby Mode, press the M Button
once to go into the Alarm Adjusting Mode.
2. Two sets of time will display alternately; the Alarm Interval Time (which is the time between each pumping session)
and the Next Alarm Time.
3. Roll the Vacuum Adjustment Wheel
up(+) or down (-) to adjust the Alarm Interval Time. The adjustment
increases (+) or decreases (-) in 15 minute increments. The Next Alarm Time will be adjusted automatically
according to the last time the pump was used.
NOTE: The Alarm Interval Time is the time from the beginning of one Expression Pattern to the beginning of the next
Expression Pattern. It is NOT the time from the ending of one Expression Pattern to the beginning of the next
one.
4. Press the Expression Button to switch to the Alarm On/Off setting.
5. Roll the Vacuum Adjustment Wheel
up(+) or down(-) to turn the Alarm Function On/Off.
6. Press the Expression Button again to save your setting.
7. Press the Expression Button one last time to save your settings.
NOTE: While in the Alarm Adjusting Mode, if no adjustments are made within 10 seconds, the setting will automatically
save and the LCD Screen will return to Clock/Standby Mode.