Medtronic MiniMed Mio Infusion Set Change Instructions
Changing the
mio™ Infusion Set Using a Revel™ Insulin Pump
To Rewind the Piston in Pump:
To Fill the Reservoir:
1. Wash your hands. Remove old infusion set from your body and the
reservoir from pump.
2. Go to Reservoir + Set in MAIN MENU, then select Reservoir Setup to
open
REWIND screen. Press to rewind.
ACT
1. Remove reservoir
from package.
2.Pull plunger rod down to
fill reservoir with air
3. After wiping top
of insulin vial
with alcohol,
hold blue
transfer guard
and press it
down onto
insulin vial until
fully pushed
into place.
4. Use thumb to
push air from
reservoir into
insulin vial.
Continue to hold
plunger rod
down.
5. Continue to hold
plunger rod
down as you
turn vial over
(vial should now
be on top and
reservoir on
bottom). Release
plunger. Then
slowly pull
plunger rod down
to fill reservoir
with insulin.
6. Check reservoir
for air bubbles.
Tap side of
reservoir to force
bubbles to rise
to top of
reservoir. Push
plunger rod
up to move
air bubbles into
insulin vial.
7. After air bubbles are
removed, pull plunger
rod back down to fill
reservoir with enough
insulin to last 2-3 days.
8. Flip vial over so it is now
on bottom. Hold blue
transfer guard with one
hand. With other hand
turn reservoir counter-
clockwise and pull it
straight up until
disconnected from blue
transfer guard. Disconnect
blue transfer guard and
dispose into a sharps
container.
plunger
rod
transfer
guard
reservoir
9501417-011 MIO Guide.indd 1
10/10/11 11:34 AM