1. DL manuals
  2. Medtronic
  3. Motherboard
  4. N’VISION 8840
  5. Technical Manual

Medtronic N’VISION 8840 Technical Manual

Manual is about: Clinician Programmer

Summary of N’VISION 8840

  • Page 1

    Medtronic confidential reference_r02 8840_enfc.Fm 3/29/04 uc20010xxxx en xxx release size inches (mm)/ctc 221438002 rev x n’vision ™ clinician programmer technical manual rx only 8840

  • Page 2

    Medtronic confidential reference_r02 8840_enfc.Fm 3/29/04 uc20010xxxx en xxx release size inches (mm)/ctc 221438002 rev x.

  • Page 3: Explanation of Symbols

    221438002 rev x medtronic confidential ref_r18 size inches (mm)/ctc uc20010xxxx en xxx release define as desired explanation of symbols n serial number storage temperature w attention. See accompanying documents y iec 60601-1, type bf equipment # caution relative humidity atmospheric pressure.

  • Page 4

    221438002 rev x medtronic confidential ref_r18 size inches (mm)/ctc uc20010xxxx en xxx release define as desired medtronic is a registered trademark of medtronic, inc. N’vision is a trademark of medtronic, inc..

  • Page 5: How to Use This Guide

    How to use this guide medtronic n’vision clinician technical manual iii 221438002 rev x medtronic confidential refrncen.Bcv size inches (mm)/ctc uc20010xxxx en xxx release define as desired how to use this guide about the model 8840 n’vision clinician programmer guide this guide presents information...

  • Page 6

    How to use this guide iv medtronic n’vision clinician technical manual 221438002 rev x medtronic confidential refrncen.Bcv size inches (mm)/ctc uc20010xxxx en xxx release define as desired.

  • Page 7: Table of Contents

    Table of contents medtronic n’vision clinician technical manual v 221438002 rev x medtronic confidential refrncen.Bcv size inches (mm)/ctc uc20010xxxx en xxx release define as desired table of contents explanation of symbols i how to use this guide iii 1. Programmer overview device description 2 sup...

  • Page 8

    Table of contents vi medtronic n’vision clinician technical manual 221438002 rev x medtronic confidential refrncen.Bcv size inches (mm)/ctc uc20010xxxx en xxx release define as desired platform session data manager 19 navigation tab bar 20 therapy-stop key 20 programming key 20 programmer connection...

  • Page 9: Programmer Overview

    Medtronic n’vision clinician technical manual 1-1 221438002 rev x medtronic confidential ref_r18 size inches (mm)/ctc uc20010xxxx en xxx release define as desired 1 programmer overview 1 device description 1-2 supply and accessories 1-2 indications for use 1-3 warnings and precautions 1-3.

  • Page 10: Device Description

    Programmer overview device description 1-2 medtronic n’vision clinician technical manual 221438002 rev x medtronic confidential ref_r18 size inches (mm)/ctc uc20010xxxx en xxx release define as desired device description the model 8840 n’vision clinician programmer is a small, portable device that o...

  • Page 11: Indications For Use

    Programmer overview indications for use medtronic n’vision clinician technical manual 1-3 221438002 rev x medtronic confidential ref_r18 size inches (mm)/ctc uc20010xxxx en xxx release define as desired indications for use the n’vision programmer is indicated for use with medtronic neurological ther...

  • Page 12: Precautions

    Programmer overview warnings and precautions 1-4 medtronic n’vision clinician technical manual 221438002 rev x medtronic confidential ref_r18 size inches (mm)/ctc uc20010xxxx en xxx release define as desired ■ when using the programmer in a sterile field, place the programmer and programming head in...

  • Page 13

    Programmer overview warnings and precautions medtronic n’vision clinician technical manual 1-5 221438002 rev x medtronic confidential ref_r18 size inches (mm)/ctc uc20010xxxx en xxx release define as desired ■ medtronic neurostimulators controlled by the n’vision programmer may affect the operation ...

  • Page 14

    Programmer overview warnings and precautions 1-6 medtronic n’vision clinician technical manual 221438002 rev x medtronic confidential ref_r18 size inches (mm)/ctc uc20010xxxx en xxx release define as desired.

  • Page 15: Programmer Description

    Medtronic n’vision clinician technical manual 2-1 221438002 rev x medtronic confidential ref_r18 size inches (mm)/ctc uc20010xxxx en xxx release define as desired 2 programmer description 2 component identification 2-2 interactive features 2-5 connection ports and other features 2-11.

  • Page 16: Component Identification

    Programmer description component identification 2-2 medtronic n’vision clinician technical manual 221438002 rev x medtronic confidential ref_r18 size inches (mm)/ctc uc20010xxxx en xxx release define as desired component identification the front of the model 8840 n’vision clinician programmer is equ...

  • Page 17

    Programmer description component identification medtronic n’vision clinician technical manual 2-3 221438002 rev x medtronic confidential ref_r18 size inches (mm)/ctc uc20010xxxx en xxx release define as desired figure 2-1. N’vision programmer front and left side w warning: the expansion port is plan...

  • Page 18

    Programmer description component identification 2-4 medtronic n’vision clinician technical manual 221438002 rev x medtronic confidential ref_r18 size inches (mm)/ctc uc20010xxxx en xxx release define as desired on the back of the n’vision programmer are the telemetry module and magnet, cable reel fo...

  • Page 19: Interactive Features

    Programmer description interactive features medtronic n’vision clinician technical manual 2-5 221438002 rev x medtronic confidential ref_r18 size inches (mm)/ctc uc20010xxxx en xxx release define as desired interactive features graphical display the touchscreen of the programmer displays text and gr...

  • Page 20

    Programmer description interactive features 2-6 medtronic n’vision clinician technical manual 221438002 rev x medtronic confidential ref_r18 size inches (mm)/ctc uc20010xxxx en xxx release define as desired ■ programmer status bar: the programmer status bar provides information on the status of vari...

  • Page 21

    Programmer description interactive features medtronic n’vision clinician technical manual 2-7 221438002 rev x medtronic confidential ref_r18 size inches (mm)/ctc uc20010xxxx en xxx release define as desired ■ title bar and application tabs: when an application is active on the n’vision programmer, t...

  • Page 22

    Programmer description interactive features 2-8 medtronic n’vision clinician technical manual 221438002 rev x medtronic confidential ref_r18 size inches (mm)/ctc uc20010xxxx en xxx release define as desired ■ primary application area: active application information comprises the largest area of the ...

  • Page 23

    Programmer description interactive features medtronic n’vision clinician technical manual 2-9 221438002 rev x medtronic confidential ref_r18 size inches (mm)/ctc uc20010xxxx en xxx release define as desired ■ secondary application area: a secondary window at the bottom of the display houses the calc...

  • Page 24: Display Feature

    Programmer description interactive features 2-10 medtronic n’vision clinician technical manual 221438002 rev x medtronic confidential ref_r18 size inches (mm)/ctc uc20010xxxx en xxx release define as desired display feature the entire area of the display is functional. Each operative sector of the d...

  • Page 25: Application Card Port

    Programmer description connection ports and other features medtronic n’vision clinician technical manual 2-11 221438002 rev x medtronic confidential ref_r18 size inches (mm)/ctc uc20010xxxx en xxx release define as desired connection ports and other features application card port therapy application...

  • Page 26: Telemetry Module

    Programmer description connection ports and other features 2-12 medtronic n’vision clinician technical manual 221438002 rev x medtronic confidential ref_r18 size inches (mm)/ctc uc20010xxxx en xxx release define as desired telemetry module the n’vision programmer is comprised of a base module and a ...

  • Page 27: How to Use The

    Medtronic n’vision clinician technical manual 3-1 221438002 rev x medtronic confidential ref_r18 size inches (mm)/ctc uc20010xxxx en xxx release define as desired 3 how to use the n’vision programmer 3 the first few pages of this chapter present basic information on use of the n’vision programmer. S...

  • Page 28: Powering Up The Programmer

    How to use the n’vision programmer powering up the programmer 3-2 medtronic n’vision clinician technical manual 221438002 rev x medtronic confidential ref_r18 size inches (mm)/ctc uc20010xxxx en xxx release define as desired powering up the programmer the power key for the model 8840 n’vision clinic...

  • Page 29

    How to use the n’vision programmer powering up the programmer medtronic n’vision clinician technical manual 3-3 221438002 rev x medtronic confidential ref_r18 size inches (mm)/ctc uc20010xxxx en xxx release define as desired the first time that the programmer is turned on, the user will be directed ...

  • Page 30

    How to use the n’vision programmer powering up the programmer 3-4 medtronic n’vision clinician technical manual 221438002 rev x medtronic confidential ref_r18 size inches (mm)/ctc uc20010xxxx en xxx release define as desired a self test, approximately 5 seconds in duration, occurs when the programme...

  • Page 31

    How to use the n’vision programmer inserting the application card medtronic n’vision clinician technical manual 3-5 221438002 rev x medtronic confidential ref_r18 size inches (mm)/ctc uc20010xxxx en xxx release define as desired inserting the application card the n’vision programmer uses only compat...

  • Page 32

    How to use the n’vision programmer inserting the application card 3-6 medtronic n’vision clinician technical manual 221438002 rev x medtronic confidential ref_r18 size inches (mm)/ctc uc20010xxxx en xxx release define as desired insert a single application card into the programmer (figure 3-5); inse...

  • Page 33: Stand-By Mode

    How to use the n’vision programmer inserting the application card medtronic n’vision clinician technical manual 3-7 221438002 rev x medtronic confidential ref_r18 size inches (mm)/ctc uc20010xxxx en xxx release define as desired stand-by mode when the n’vision programmer is powered up and in use, th...

  • Page 34: Navigating Menu Options

    How to use the n’vision programmer navigating menu options 3-8 medtronic n’vision clinician technical manual 221438002 rev x medtronic confidential ref_r18 size inches (mm)/ctc uc20010xxxx en xxx release define as desired navigating menu options the programmer display figure 3-6 is a representation ...

  • Page 35: Using The Display

    How to use the n’vision programmer navigating menu options medtronic n’vision clinician technical manual 3-9 221438002 rev x medtronic confidential ref_r18 size inches (mm)/ctc uc20010xxxx en xxx release define as desired using the display most user input to the n’vision programmer is via the displa...

  • Page 36

    How to use the n’vision programmer navigating menu options 3-10 medtronic n’vision clinician technical manual 221438002 rev x medtronic confidential ref_r18 size inches (mm)/ctc uc20010xxxx en xxx release define as desired figure 3-7. Scroll wheel and programming key locations the programming key (f...

  • Page 37: Programmer Operation

    How to use the n’vision programmer programmer operation medtronic n’vision clinician technical manual 3-11 221438002 rev x medtronic confidential ref_r18 size inches (mm)/ctc uc20010xxxx en xxx release define as desired programmer operation start-up and self-test sequence when the power key is activ...

  • Page 38: Status Bar Icons

    How to use the n’vision programmer programmer operation 3-12 medtronic n’vision clinician technical manual 221438002 rev x medtronic confidential ref_r18 size inches (mm)/ctc uc20010xxxx en xxx release define as desired status bar icons telemetry status figure 3-8. Status bar icons--telemetry status...

  • Page 39

    How to use the n’vision programmer programmer operation medtronic n’vision clinician technical manual 3-13 221438002 rev x medtronic confidential ref_r18 size inches (mm)/ctc uc20010xxxx en xxx release define as desired figure 3-9. Status bar icons--printer, connection, and battery status software a...

  • Page 40: Using The Slider Bar

    How to use the n’vision programmer programmer operation 3-14 medtronic n’vision clinician technical manual 221438002 rev x medtronic confidential ref_r18 size inches (mm)/ctc uc20010xxxx en xxx release define as desired using the slider bar at times, the user may choose to interrupt a software appli...

  • Page 41

    How to use the n’vision programmer programmer operation medtronic n’vision clinician technical manual 3-15 221438002 rev x medtronic confidential ref_r18 size inches (mm)/ctc uc20010xxxx en xxx release define as desired ■ the information control icon gives information about the device, including: mo...

  • Page 42

    How to use the n’vision programmer programmer operation 3-16 medtronic n’vision clinician technical manual 221438002 rev x medtronic confidential ref_r18 size inches (mm)/ctc uc20010xxxx en xxx release define as desired ■ the settings control icon allows adjustment of the display contrast, speaker v...

  • Page 43

    How to use the n’vision programmer programmer operation medtronic n’vision clinician technical manual 3-17 221438002 rev x medtronic confidential ref_r18 size inches (mm)/ctc uc20010xxxx en xxx release define as desired ■ the localization control function allows changes to language preference and da...

  • Page 44

    How to use the n’vision programmer programmer operation 3-18 medtronic n’vision clinician technical manual 221438002 rev x medtronic confidential ref_r18 size inches (mm)/ctc uc20010xxxx en xxx release define as desired ■ the printer control icon allows you to access the session data manager and giv...

  • Page 45

    How to use the n’vision programmer programmer operation medtronic n’vision clinician technical manual 3-19 221438002 rev x medtronic confidential ref_r18 size inches (mm)/ctc uc20010xxxx en xxx release define as desired ■ the device calculator is accessed through the calculator control icon. The cal...

  • Page 46: Therapy-Stop Key

    How to use the n’vision programmer programmer operation 3-20 medtronic n’vision clinician technical manual 221438002 rev x medtronic confidential ref_r18 size inches (mm)/ctc uc20010xxxx en xxx release define as desired navigation tab bar each application loaded on the n’vision programmer is compris...

  • Page 47: Programmer Connections

    How to use the n’vision programmer programmer connections medtronic n’vision clinician technical manual 3-21 221438002 rev x medtronic confidential ref_r18 size inches (mm)/ctc uc20010xxxx en xxx release define as desired programmer connections communicating with a printer the n’vision programmer su...

  • Page 48: Telemetry Module Use

    How to use the n’vision programmer telemetry module use 3-22 medtronic n’vision clinician technical manual 221438002 rev x medtronic confidential ref_r18 size inches (mm)/ctc uc20010xxxx en xxx release define as desired telemetry module use the telemetry module located on the back of the n’vision pr...

  • Page 49

    How to use the n’vision programmer telemetry module use medtronic n’vision clinician technical manual 3-23 221438002 rev x medtronic confidential ref_r18 size inches (mm)/ctc uc20010xxxx en xxx release define as desired positioning the telemetry head figures 3-18 through 3-21 demonstrate proper posi...

  • Page 50

    How to use the n’vision programmer telemetry module use 3-24 medtronic n’vision clinician technical manual 221438002 rev x medtronic confidential ref_r18 size inches (mm)/ctc uc20010xxxx en xxx release define as desired figure 3-19. Telemetry head locked on programmer, patient supine figure 3-20. Te...

  • Page 51

    How to use the n’vision programmer telemetry module use medtronic n’vision clinician technical manual 3-25 221438002 rev x medtronic confidential ref_r18 size inches (mm)/ctc uc20010xxxx en xxx release define as desired figure 3-21. Telemetry head locked on programmer, patient upright reeling in the...

  • Page 52

    How to use the n’vision programmer telemetry module use 3-26 medtronic n’vision clinician technical manual 221438002 rev x medtronic confidential ref_r18 size inches (mm)/ctc uc20010xxxx en xxx release define as desired figure 3-22. Returning the telemetry head to its locked position.

  • Page 53: Connecting The Magnet to The

    How to use the n’vision programmer telemetry module use medtronic n’vision clinician technical manual 3-27 221438002 rev x medtronic confidential ref_r18 size inches (mm)/ctc uc20010xxxx en xxx release define as desired connecting the magnet to the telemetry module the telemetry module includes a mo...

  • Page 54

    How to use the n’vision programmer telemetry module use 3-28 medtronic n’vision clinician technical manual 221438002 rev x medtronic confidential ref_r18 size inches (mm)/ctc uc20010xxxx en xxx release define as desired # cautions: ■ the magnet used in pump programming creates a magnetic field that ...

  • Page 55: Programmer

    Medtronic n’vision clinician technical manual 4-1 221438002 rev x medtronic confidential ref_r18 size inches (mm)/ctc uc20010xxxx en xxx release define as desired 4 programmer maintenance 4 changing the programmer batteries 4-2 cleaning the display 4-3 display calibration 4-4.

  • Page 56

    Programmer maintenance changing the programmer batteries 4-2 medtronic n’vision clinician technical manual 221438002 rev x medtronic confidential ref_r18 size inches (mm)/ctc uc20010xxxx en xxx release define as desired changing the programmer batteries the n’vision programmer operates on four “aa” ...

  • Page 57: Cleaning The Display

    Programmer maintenance cleaning the display medtronic n’vision clinician technical manual 4-3 221438002 rev x medtronic confidential ref_r18 size inches (mm)/ctc uc20010xxxx en xxx release define as desired ■ “aa” battery usage and depletion increases with the use of a magnet, which is required when...

  • Page 58: Display Calibration

    Programmer maintenance display calibration 4-4 medtronic n’vision clinician technical manual 221438002 rev x medtronic confidential ref_r18 size inches (mm)/ctc uc20010xxxx en xxx release define as desired display calibration the display of the n’vision programmer may require periodic calibration. T...

  • Page 59: Safety and Technical Checks

    Programmer maintenance display calibration medtronic n’vision clinician technical manual 4-5 221438002 rev x medtronic confidential ref_r18 size inches (mm)/ctc uc20010xxxx en xxx release define as desired if display calibration fails, the programmer will reinitiate the calibration procedure until i...

  • Page 60

    Programmer maintenance display calibration 4-6 medtronic n’vision clinician technical manual 221438002 rev x medtronic confidential ref_r18 size inches (mm)/ctc uc20010xxxx en xxx release define as desired.

  • Page 61: Troubleshooting

    Medtronic n’vision clinician technical manual 5-1 221438002 rev x medtronic confidential ref_r18 size inches (mm)/ctc uc20010xxxx en xxx release define as desired 5 troubleshooting 5 troubleshooting reference guide 5-2.

  • Page 62

    Troubleshooting troubleshooting reference guide 5-2 medtronic n’vision clinician technical manual 221438002 rev x medtronic confidential ref_r18 size inches (mm)/ctc uc20010xxxx en xxx release define as desired troubleshooting reference guide for questions about maintenance of the n’vision programme...

  • Page 63: Specifications and

    Medtronic n’vision clinician technical manual 6-1 221438002 rev x medtronic confidential ref_r18 size inches (mm)/ctc uc20010xxxx en xxx release define as desired 6 specifications and warranty 6 n’vision programmer specifications 6-2 warranty 6-4.

  • Page 64

    Specifications and warranty n’vision programmer specifications 6-2 medtronic n’vision clinician technical manual 221438002 rev x medtronic confidential ref_r18 size inches (mm)/ctc uc20010xxxx en xxx release define as desired n’vision programmer specifications electrical and operating characteristic...

  • Page 65: Programmer Storage and

    Specifications and warranty n’vision programmer specifications medtronic n’vision clinician technical manual 6-3 221438002 rev x medtronic confidential ref_r18 size inches (mm)/ctc uc20010xxxx en xxx release define as desired programmer storage and operating conditions note: the n’vision programmer ...

  • Page 66: Warranty

    Specifications and warranty warranty 6-4 medtronic n’vision clinician technical manual 221438002 rev x medtronic confidential ref_r18 size inches (mm)/ctc uc20010xxxx en xxx release define as desired warranty medtronic ® neurological equipment limited warranty 1 (u.S. Customers only) a. This limited...

  • Page 67

    Specifications and warranty warranty medtronic n’vision clinician technical manual 6-5 221438002 rev x medtronic confidential ref_r18 size inches (mm)/ctc uc20010xxxx en xxx release define as desired (2) this limited warranty is made only to the purchaser of the equipment. As to all others, medtroni...

  • Page 68

    Specifications and warranty warranty 6-6 medtronic n’vision clinician technical manual 221438002 rev x medtronic confidential ref_r18 size inches (mm)/ctc uc20010xxxx en xxx release define as desired.

  • Page 69: Glossary

    Medtronic n’vision clinician technical manual a-1 221438002 rev x medtronic confidential ref_r18 size inches (mm)/ctc uc20010xxxx en xxx release define as desired a glossary a.

  • Page 70

    Glossary a-2 medtronic n’vision clinician technical manual 221438002 rev x medtronic confidential ref_r18 size inches (mm)/ctc uc20010xxxx en xxx release define as desired active icon – a graphical representation of a button that, when selected, initiates an operation or action. Application card – a...

  • Page 71

    8840_en_bcv.Fm 3/29/04 uc20010xxxx en xxx release size inches (mm)/ctc medtronic confidential reference_r02 221438002 rev x.

  • Page 72

    Medtronic confidential reference_r02 8840_en_bcv.Fm 3/29/04 uc20010xxxx en xxx release size inches (mm)/ctc 221438002 rev x © medtronic, inc. 2004 all rights reserved 221438002 medtronic, inc. 710 medtronic parkway minneapolis, mn 55432-5604 usa internet: www.Medtronic.Com tel. 1-763-505-5000 toll-f...