Stereo wireless bluetooth ® headphones model: af62 user manual.
En table of contents product overview charging powering on and off pairing with bluetooth® devices iphone®, ipad®, and ipod touch® android™ phones and tablets computers and laptops pairing with bluetooth devices using nfc connecting to paired devices using the matrix 2 headphones adjusting volume co...
Product overview en.
Charging *** you must completely charge the headset before the first use *** connect the usb charging cable to any powered usb port and to the usb jack on the right ear cup. The red led indicator will light solid while charging. Charge time is typically 3-6 hours for the first charge and 2-3 hours f...
Pairing with bluetooth® devices *** it is only necessary to pair your matrix2 once with each device *** open the bluetooth menu* on the device you wish to pair. Some devices require you to select “search for devices” or “add new devices” in order to create a bluetooth pairing. Make sure the matrix2 ...
Connecting to paired devices *** the matrix2 must have been previously paired with your device before you can connect *** when the matrix2 is turned on and not in pairing mode, it should connect to the last connected device automatically. If the last connected device discoverable, the matrix2 will c...
Note: in standby mode and while playing media with most devices, volume adjustments will only change the volume of the matrix2. Adjust device volume as needed to further increase or decrease the volume. During a phone call the matrix2 will control device volume. Some newer devices use avrcp 1.3 blue...
Using the matrix 2 headphones (continued) controlling media playback 1 you may need to focus on the media player application for initial playback to start. 2 not all media players support this functionality. Note: if you answer or make a call while listening to media, the media will be paused until ...
7 multipoint multipoint pairing multipoint allows two bluetooth devices to be connected to the matrix2 simultaneously. Both devices will need to be paired before multipoint can be used. To use two bluetooth devices with the matrix2, first pair them by following the pairing procedure described in the...
Using as a wired headphone the matrix2 comes with a 3.5mm audio jack on the left ear cup and an audio cable for wired use. This allows use with in-flight entertainment devices, devices that don’t have bluetooth or aren’t paired, or when the battery is depleted. The matrix2 can be used wired while st...
Www.Meeaudio.Com support@meelec.Com.
