Meelectronics AF65 AIR-FI Touch User manual - Locating The Bluetooth Menu:
PAIRING WITH BLUETOOTH® DEVICES
*** Your headset must be paired to a Bluetooth device before it can be used.
It is only necessary to pair your headset once with each device ***
Open the Bluetooth menu on the device you wish to pair (see Locating
the Bluetooth menu section below for more details). Some devices
require you to select “search for devices” or “add new device” in order to
create a Bluetooth pairing.
With the headset turned off, press and hold the Multifunction button for
approximately 6 seconds or until you hear the second tone. The status
indicator light will flash red and blue in an alternating pattern while the
Air-Fi Touch is in pairing mode. (Note: The Air-Fi Touch will enter standby
mode if not paired within 3 minutes)
Wait until you see “Air-Fi Touch” on your device screen.
Select “Air-Fi Touch” on your device and follow any further prompts to pair.
Use “0000” if a pin is required.
1.
2.
3.
4.
LOCATING THE BLUETOOTH MENU:
iPhone, iPad, and iPod Touch
On your device, go to Settings
Select Bluetooth. If Bluetooth is not on, turn it on.
The iPhone/iPad/iPod will automatically search for new devices
a)
b)
Android™ Phones and Tablets
On your device, go to Settings menu
Select Bluetooth (on older Android devices Bluetooth is found in
the Wireless & Networks menu). If Bluetooth is not on, turn it on.
Select “Search for Devices” if your phone or tablet does not
automatically search for new devices
a)
b)
Computers, Laptops, and Other Devices
Visit www.meelec.com/bluetooth for pairing, connecting, and setup
information.
If pairing fails after several tries, please refer to your device’s user manual
for further information. Visit www.meelec.com/bluetooth for pairing videos,
troubleshooting, and additional information.
6
Windows® Phone 8 devices
On your device, open the Settings menu
Select Bluetooth. If Bluetooth is not on, turn it on.
The phone will automatically search for new devices
a)
b)