1. DL manuals
  2. Mega Lite
  3. Amplifier
  4. MC2010-Q-Loader
  5. User Manual

Mega Lite MC2010-Q-Loader User Manual

Summary of MC2010-Q-Loader

  • Page 1

    User manual table of contents safety information……………………………………………………………………………………………. 3 specifications…………………………………………………………………………………………………….. 4 main power connection………………………………………………………………………………….. 5 dmx-512 connection…………………………………………………………………...……………...... 5 main control menu.........................

  • Page 3

    Check that the unit has not been damaged during transport protection against fire 1. Replace power supply only with the specified type and rating. 2. Do not install the unit to close to a heat source. 3. Make sure cable are properly secured away from unit. 4. Maximum surface operating temperature 80...

  • Page 4: Specifications

    Specifications 4 part numbers fixture mc2010-q-loader mechanical specifications fixture packaged for shipping size: 11.12 ” x 5.62” x 2.5” weight: 2.85 lb size: 16” x 7.75” x 5.25” weight: 3.5 lb dmx channels: 160 rdm: control the dmx addresses of the fixture chases: 16 chases fixtures: 16 fixtures ...

  • Page 5: Main Power Connection

    5 main power connection caution! 1. Do not connect fixture to a dimmer system. 2. This unit has auto switching power supply. It will respond to 100v or 240v automatically 3. Replace power supply only with the specified type and rating. The occupation of the connection-cable is as follows: 1 2 3 1 3 ...

  • Page 6: Main Control Menu

    6 main control menu the control comes pre-loaded with a program to be used with standard 3 channel rgb led lighting fixtures. Other programs are available and can be loaded via our website at www.Mega-lite.Com/prolight/dmxcont/qloader you can also create your own programs by using the programming se...

  • Page 7: Manual Mode

    Manual mode select the desired fixture or fixtures from 1 to 16 adjust the faders to represent the desired look if the fixtures has more than 5 faders in the profile press page b to activate faders 6 to 10 using faders using presets select the desired fixture or fixtures from 1 to16 select the desir...

  • Page 8: Run A Chase

    Run a chase up to 16 scenes can be opened at the same time. Press the corresponding scene button to turn on, and again to turn off. Auto mode 1. Press a desired chase button 2. Press the run mode button until the auto mode indicator light is on. 3. You can adjust the fade and wait time using the fad...

  • Page 9: Cleaning And Maintenance

    Load show from usb 1. Insert usb flash drive 2. Press and hold the run mode and the button at the same time until display reads load. 3. Press the fixture button 1-16 as the show you want to load. Note: if green indicator light is on there is an existing file in the usb. =q-loader 1 =ok when the dis...

  • Page 10: Warranty Information

    Mega-lite 5718 kenwick st san antonio, tx 78238 ph 210-684-2600 fax 210-855-6279 www.Mega-lite.Com / info@mega-lite.Com warranty information limited warranty unless otherwise stated, your product is covered by a one year parts and labor limited warranty. Dichroic filters and glass gobos are not guar...