1. DL manuals
  2. Mega Lite
  3. Flood Light
  4. N-E Color Wash
  5. User Manual

Mega Lite N-E Color Wash User Manual

Summary of N-E Color Wash

  • Page 1

    User manual table of contents safety information……………………………………………………………………………………………. 3 specifications…………………………………………………………………………………………………….. 4 main power connection………………………………………………………………………………….. 5 dmx-512 connection…………………………………………………………………...……………...... 5 rigging the fixture……………………………………………………...

  • Page 3

    Check that the unit has not been damaged during transport protection against fire 1. Maintain a minimum of 1 foot distance from any type of flame. 3. Replace fuse only with the specified type and rating. 4. Do not install the unit to close to a heat source. 5. Make sure cable are properly secured aw...

  • Page 4: Technical Information

    Technical information 4 part numbers fixture 4040– n-e color wash mechanical specifications fixture fixture fixture fixture packaged for shipping packaged for shipping packaged for shipping packaged for shipping size: 16.75”l x 5”w x 8.5”h weight: 6 lbs size: 18.75”l x 8.5”w x 7”h weight: 10 lbs dmx...

  • Page 5: Main Power Connection

    5 main power connection caution! 1. Do not connect fixture to a dimmer system. 2. This unit has auto switching power supply. It will respond to 110v or 220v automatically 3. This unit must be earthed. (electronically grounded) 4. Replace fuse only with the specified type and rating. The occupation o...

  • Page 6: Rigging The Fixture

    Rigging the fixture caution! 1. The installations must be carried out by an authorized dealer or trained professional. 2. Unit may cause severe injures if you have doubts concerning the safety do not install. 3. Unit is to be 24inches away from flammable materials (decoration material) 4. Use high q...

  • Page 7: Main Control Menu

    7 main control menu the control board on the fixture base is your interface to access and control all the functions on the unit. Its dipswitch interface gives you a code view of the op- tions. The following will explain each function and its options. 0 0 1 0 0 2 0 0 4 0 0 8 0 1 6 0 3 2 0 6 4 1 2 8 2...

  • Page 8: Cleaning And Maintenance

    Cleaning and maintenance installation maintenance: the operator has to make sure that the unit is operating safely and has the installations and electron- ics checked by an expert every 2 years. The following points have to be considered during the inspection: 1) all screws used for installing the d...

  • Page 9

    Mega-lite 5718 kenwick st san antonio, tx 78238 ph 210-684-2600 fax 210-855-6279 www.Mega-lite.Com / info@mega-lite.Com.