Mega Lite TUFF BABY UV-35 User Manual - page 7
7
Fade
This function allows you to select a preprogrammed fade sequences. Press Enter use the up/down keys to select de-
sired fade program (15 options). Press Enter to set the desired sped use the up/down keys (15 options). Press Enter to
confirm the settings.
Flash
Dimming Speed
Press Enter to select the desired dimming speed when used with a DMX controler. Use the up/down keys to select from
0 to 3. 0 speed will be the fastest 4 will be the slowest. Press Enter to confirm.
This function allows you to select a preprogrammed strobe sequences. Press Enter use the up/down keys to select de-
sired strobe program (15 options). Press Enter to set the desired sped use the up/down keys (15 options). Press Enter
to confirm the settings.
Display Setting
Press Enter to select the desired display setting. Use the up/down keys to select from On for the display to stay on or
Off for the display to turn off after 30 sec of no use. Press Enter to confirm.
Load
Manufactures Software update function (manufacture personnel only)
Menu
Up Down Enter
CONTROL BOARD
DMX Indicator
When DMX Signal is being received the last point on the control board display will flash. If
there is no DMX signal present is will be off.