Megamaster ETHANOL 1100 Owner's Manual - page 6
2) Unscrew Wall mounted part B from Wall mounted part A (which
is connected together in packing with 2 x self drill screw).
3) Drill mounting screw hole on the wall where there are no
combustible materials surrounding the fireplace, leave a
clearance or opening of 30cm (300mm) in all four directions.
4) Put the mounting screw into the two holes, then wrench and
tighten the screw, connect the Wall mounted part B to the
mounting screw with mounting screw nut.
5) Connect the wall mounting part B to mounting part A, then screw
them together.
Caution: This appliance may be heavy and awkward to install
alone, ensure you have adequate help to hold and mount the
fireplace.
Preparation for use:
1. Check that the fuel tank is in right position of firebox.
2. Fill the liquid Bio Ethanol into the fuel compartment.
Be very
careful when filling and only use the included accessory (measuring
cup and funnel). Take care not to spill the fuel!
3. Do not fill any other compartments with fuel, if there is spillage
please take care to clean the areas before lighting the fire.
4. Make sure to never fill the fuel tank with more than 1,25 Litre,
and never fill the fuel tank above the Max indicating line in
burner.
5. Place the compartment lid on the fuel compartment. Ensure that
the cover is positioned properly by moving it back and forth multiple