- DL manuals
- Megasat
- Receiver
- Megasat HD900
- User Manual
Megasat Megasat HD900 User Manual
Summary of Megasat HD900
Page 1
Bedienungsanleitung user manual digitaler hd satelliten receiver megasat hd900 stand: dezember 2011 v1.0
Page 2
42 pid(packet identifier) a set of numbers that identifies transport stream packets containing data from a single data stream. Polarization polarizations allows several programmers to be fit into the same frequency band. The signals from a satellite are transmitted either with linear (vertical or ho...
Page 3
Inhalt allgemeine informationen……………………………………………. 4 haupteigenschaften........................................................................... 5 sicherheitshinweise........................................................................... 6 lieferumfang..............................................
Page 4
41 5.3 glossary antenna a device collects and radiates electromagnetic waves. Includes a satellite dish and broadband antenna. Diseqc diseqc(digital satellite equipment control)system, it is a communication bus between satellite receivers and peripheral equipment using the only existing coaxial cabl...
Page 5
Hauptfunktionen mpeg2 sd, mpeg2 hd, h.264avc sd, h.264/avc hd, mp4 usb schnittstelle (mediaplayer unterstützung) dv-out hdtv (hdmi) 480i/p, 576i/p, 720p, 1080i, 1080p mit hdcp scart-anschluss, video und l/r audio chinch digitaler audioausgang spdif coaxial scpc und mcpc empfangen von c/ku-band satel...
Page 6
39 5. Additional information 5.1 trouble shooting you might meet abnormal working of this stb with various reasons. Check the following which may help you. Problem possible causes what to do led on the front panel fail to light up/is not lit. Main supply cable is not connected. Check if the main sup...
Page 7
Fernbedienung 1.Tv/r: umschalten zwischen tv und radio modus. 2. Power: receiver an oder aus. 3. Mute: stummschaltung 4. Hdmi: Ändert die hdmi auflösung 5. Format: einstellung bildformat 4:3 & 16:9 6. Time: timer einstellung. 7. Sleep: zeiteinstellung bis zur abschaltung 8. Nummer tasten (0~9): dire...
Page 8
1 anschluss lnb sat-spiegel receiver mit der außeneinheit (lnb) verbinden. (1) verbinden sie die koaxialleitung über die f-anschlüssen mit dem receiver und dem lnb. (receiver lnb in). (2) sie können feststehende antennen oder auch motor gesteuerte antennen an den receiver anschließen.(bitte beachten...
Page 9
36 4.5 expansion games some classic games which will give your some happy times to play with !! Multi pictures in this menu, user can watch 9 different small tv in one windows, we called it multi pics usb ( worked with a usb device ) usb menu only working when a usb device is connected with your stb...
Page 10
10 installation hinzufügen wählen sie mit den curser tasten „hinzufügen“ um einen neuen satelliten hinzuzufügen. Geben sie die daten des neuen satelliten ein und bestätigen diese mit ok. Der neue satellit wird der satellitenlist hinzugefügt. Satelliten pos. Verschieben wählen sie mit den curser tast...
Page 11
34 favorites press menu button, here you can sort the channels in different type, such as news, movies, music, sports, using the up/down keys select any sort press ok, then you can set the channels fav type by pressing fav key. Note: radio favors operation similar to the above. 4.3 settings here you...
Page 12
12 22khz hier können sie die standardeinstellung der 22khz schaltung ändern. Als standard ist die option „auto“ gewählt. Diseqc type diseqc1.0 oder 1.1 betreiben sie den receiver an einem diseqc schalter oder an einem multischalter mit diseqc müssen sie die diseqc einstellung anpassen. Für den stand...
Page 13
32 f: channel search in this menu, you can select scan mode like tp/blind/network scan, you also can select all channels & fta channels by setting the search option g: start search channels after set above step, press ok you will be asked whether delete all exist channels if there are existing chann...
Page 14
14 favoriten wählen sie favoriten bearbeiten um ihre favoriten gruppen zu erstellen. Es sind 4 gruppen voreingestellt, die sie beliebig umbenennen können. Wählen sie die gewünschte gruppe und markieren sie die sender zur gruppe durch drücken der ok taste. Hinweis: das bearbeiten der radiosender ist ...
Page 15
30 add add satellite by using the red key. Here you can input new satellite angle, satellite direction (east, west), band (ku,c). Ok to confirm the setting and this new satellite will be added to the end of the satellite list. Edit select the satellite then press green button. You can change the sat...
Page 16
16 erweitert im hauptmenü erweitert haben sie folgende untermenüs. Spiele – usb explorer – wirless einstellung – ip einstellung – ftp download - wetter spiele im menü spiele haben sie 8 spiele zur auswahl. Usb explorer im menü usb explorer können sie ihre angeschlossenen usb geräte verwalten. Mit de...
Page 17
28 3. Installation and connection the following diagram shows you how to connect the hd receiver, tv, lnb and other equipment, please read this first if you are not sure about the connection, and it will guide you to the correct connection. 3.1 connecting to dish lnb and tv you can connect one fixed...
Page 18
18 ok/list 1. Drücken sie die ok-taste, während sie fernsehen oder radio anhören und es wird die tv/radio-kanal liste angezeigt. 2. Wählen sie mit den tasten pr+, pr- den kanal ausund bestätigen sie ihre wahl mit der ok-taste. 3. Drücken sie die menÜ-taste oder exit-taste, um das fenster zu schließe...
Page 19
26 2.3 remote control unit 1.Tv/r: switch between tv and radio. 2. Power: switch the receiver on or off. 3. Mute: turn the sound on/off. 4. Hdmi: switch the tv type. 5. Format: switch 4:3 & 16:9 screen formats. 6. Time: setup event timer. 7. Sleep: setting the time for turning the receiver off 8. Nu...
Page 20
20 technische spezifikation tuner & demodulator demodulation qpsk, 8psk frequenzbereich 950 mhz to 2150 mhz signal level -25 to -65 dbm rf impedanz 75 Ω ohms unbalanced lnb 13v/18v/off, max = 500ma lnb tone switch 22khz+/-2khz, 0.6vpp+/-0.2v diseqc kontrolle version diseq c 1.0/1.1/1.2/1.3(usals)com...
Page 21
24 2. Basic function 2.1 front panel 1. Power button the power button is used to turn the power on or to make it on standby mode. 2. Ch buttons change channels or items from top to bottom on the menus. 3. Vol buttons change channel’s volume from high to low. 4. Menu button press to pop up the menu f...
Page 22
22 safety precaution this stb has been designed and manufactured to satisfy the international safety standards. Please read the following safety precautions carefully before operating this receiver. Main supply: before operating, please check the units operating voltage is 100~240v ac 50/60hz. Overl...