Megatron TP UP-NH User Manual - page 3
24 25
- Voltage Control: by test of voltage
1.8
Printer-head Protection Function
- Stop warning for out of paper
- Stop warning for printer-head over/under the normal temperature
1.9
Interface
- Serial (compatible with RS232)
Baud Rate: 1200/2400/4800/9600, selected by DIP switch built-in
Handshaking: RTS/CTS or XON/XOFF protocol.
Data Structure: 7/8 Data Bits and even, odd or no Parity Bit
Connect Socket: D-Sub 25pin (femal in printer side)
Signal Level: EIA +/-3V to +/-12V
- Parallel (compatible with PC Printer port)
Handshaking: BUSY or ACK protocol
Connect Socket: D-Sub 25pin (male in printer side)
Signal Level: TTL
1.10 Power
Supply
- DC9V 1A average printing current 2.6A, non-printing current 80mA.
- Power Socket: DC Jack type with center pin
φ 2.0mm
1.11 Power Supply Control
- Auto Power off Function
- Support Push Button and Interface Signal Control
1.12 Dimension
- 160 (w) x 106 (d) x 42 (h) mm
1.13 Weight
- 350g including paper roll
1.14 Operation
Environment
- Operating temperature: 5
o
- 50
o
C
- Relative humidity: 5 - 85% RH
Chapter 2
Installation and Operation
2.1
Appearance