0
1 table of contents 1. Camera precautions………………………………… 3 2. Preparation…………………………………………... 6 z standard accessories………………………... 6 z parts names…………………………………... 7 z charging the battery …….…..…………….... 8 z loading the sd card………..………………… 10 z attaching the strap………..………………….. 11 3. Quick start…………………...
2 table of contents z playback mode……………………………….. 21 pictures/ video clips playback………..… 21 single video clip playback delete…..…. 22 thumbnail……..…….…………………….. 22 slide show………….……………………… 23 delete current picture or video clip……. 23 delete all……………..……………………. 24 protect……………………………………… 24 print………...
3 welcome thank you for choosing the camera to pursue your dsc. Whether you are creating memories of your friends and family or exploring the great outdoors to get the utmost satisfaction from your dsc, please take a moment to read through this manual. Its contents will send you on an educational jo...
4 • keep the camera away from water and other liquids. Do not use the camera with wet hands. Never use the camera in the rain or snow. Moisture creates the danger of fire and electric shock. • keep the camera and its accessories out of the reach of children and animals to prevent accidents or damage...
5 fcc notice this equipment has been tested and found to comply with the limits for a class b digital device, pursuant to part 15 of the fcc rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses an...
6 2. Preparation standard accessories camera manual cd carry bag strap usb cable docking.
7 part names front view back view.
8 charging the battery long battery life is one of the key benefits of this product compared to others. Your camera battery has already been charged prior to shipment. However, just to be safe, you may want to follow the instructions below to make sure that your camera is fully charged before leavin...
9 battery power status caution * it takes approximately 1.5~2 hours to fully charge a depleted battery. * the camera can be charge at ambient temperatures between 0℃ (32℉) and +40℃ (104℉). * the battery does not need to be fully discharge or exhausted before being recharged. * lithium-polymer batter...
10 loading sd card insert sd card into memory card slot and push it all the way in. The lcd will show the sd card indicator when an sd card is in the slot. When the optional sd card is installed: * all images/ movies by default will be automatically stored in sd card * it may be necessary to format ...
11 attaching the strap 1. The small loop goes through the strap holder. 2. Then the small loop goes through one clutch of the loop again and pulls tightly..
12 3. Quick start powering the camera on/ off power on 1. Press the power button to turn on. The blue led light up indicate power is on. 2. When the lcd monitor has been activated, the camera is ready to use. Power off 1. Press the power button again to turn the camera off. 2. The camera also turns ...
13 taking picture holding the camera correctly due to the extremely compact size and light weight of the camera, it is critical that you hold the camera securely in order to avoid “camera shake”. The camera is particularly sensitive to shake in low light environments. Taking a picture in low light r...
14 capturing still images 1. Power on the camera. 2. Press the shutter button to take a picture. Recording video clips 1. Power on the camera. 2. Slide the mode switch and select the video mode. Press ok button for confirmation. 3. Press the shutter button to start recording a movie. 4. Press the sh...
15 basic shooting functions using the zoom 1. Under still mode and movie mode. 2. Use the lcd monitor to frame your subject. 3. Press the zoom in and zoom out to take a picture or record a movie clip. Flash setting 1. Under still mode. 2. Press / flash button directly to change the flash mode- auto/...
16 4. Advance mode still mode the camera is default on still mode. To press menu button for modes setting, press menu button again to return the capture mode. Picture quality 1. Under still mode. 2. Press menu button. 3. Press or to select 1m (1280x960)/ 3m (2048x 1536)/ 11m (3840x2880 by interpolat...
17 exposure value 1. Under still mode. 2. Press menu button and press to select exposure value mode. 3. Press or to adjust the exposure compensation from -2 to +2 in 0.5 increments. White balance 1. Under still mode. 2. Press menu button and press to select white balance mode. 3. Press or to select ...
18 burst snapshot 1. Under still mode, 2. Press menu button and press to select burst snapshot mode. 3. Press or to select single/ burst. 4. Press menu button to return the capture mode, and then press shutter button to capture 3 images continuously. Self-timer 1. Under still mode. 2. Press menu but...
19 video mode slide the mode switch and select the video mode. Press shutter/ok button for confirmation. To press menu button for modes setting, press menu button again to return to recording mode. Video resolution 1. Under video mode. 2. Press menu button. 3. Press or to select 320x240/ 640x480 mov...
20 exposure value 1. Under video mode. 2. Press menu button and press to select exposure value mode. 3. Press or to adjust the exposure compensation from -2 to +2 in 0.5 increments. White balance 1. Under video mode 2. Press menu button and press to select white balance mode. 3. Press or to select a...
21 playback mode pictures/ video clips playback 1. Slide the mode switch and select playback mode. Press shutter/ok button for confirmation. 2. Press or to select the pictures/ video clips you want to review..
22 single video clip playback 1. Press to playback, to press twice is quick playback. 2. Press to stop, to press twice is backward. Thumbnail 1. Press shutter/ok button to enter thumbnailto show 6 pictures/ video clips at the same time on tft display. 2. To press shutter/ok button to return the orig...
23 slide show 1. Under playback mode. 2. Press menu button. 3. Press shutter/ok button to start slide show, press shutter/ok button again to stop. Delete current picture or video clip 1. Under playback mode. 2. Press menu button and press to select delete mode. 3. Press shutter/ok button to delete c...
24 delete all 1. Under playback mode. 2. Press menu button and press to select delete all mode. 3. Press shutter/ok button to delete all pictures and video clips. 4. Press shutter/ok button again for confirmation, press menu button to exit. Protect 1. Under playback mode. 2. Press menu button and pr...
25 print 1. Under playback mode. 2. Press menu button and press to select print mode. 3. Press to select on to mark current picture to be printed. 4. The print symbol will be shown on the top right of picture. Playback zooming 1. Under picture playback mode. 2. Press to pan the center of the picture...
26 5. Settings slide the mode switch and select setting mode. Press shutter/ok button for confirmation. To slide the mode switch again to return the mode status. Language 1. Under setting mode. 2. Press shutter/ok button. 3. Press to select english/ french/ german/ spanish/ dutch/ italian/ chinese l...
27 format storage 1. Under setting mode. 2. Press to select format storage mode. 3. Press shutter/ok button to format memory card, press menu button for exit. Auto power off 1. Under setting mode. 2. Press to select auto power off mode. 3. Press or to choose the 30 sec/ 1min/ 3min/ 5min you want to ...
28 light frequency 1. Under setting mode. 2. Press to select light freq. Mode. 3. Press or to choose the correct frequency- 50hz/ 60hz in your territory when you take picture indoors, and then slide mode switch to return the mode status. Default setting 1. Under setting mode. 2. Press to select defa...
29 system information 1. Under setting mode. 2. Press to select system info. Mode. 3. Press shutter/ok button to show firmware version for this camera, press shutter/ok again to return setting mode..
30 6. Making connection install photoimpression 1. Insert the installation cd into your pc’s cd-rom drive. 2. The introduction screen will appear automatically. 3. Click “arcsoft photoimpression” 4. Choose setup language.
31 5. Click “next” 6. Click ”yes” 7. Click “next”.
32 8. Click “next” 9. Click “finish” 10. Setup direct x 9.0, click “next”.
33 11. Click “next” 12. Click “finish” note: to find out more about totalmedia or how to use it, consult online help by clicking ” ? “ icon on the top menu bar or website www.Acrosoft.Com.
34 install videoimpression 1. Insert the installation cd into your pc’s cd-rom drive. 2. The introduction screen will appear automatically. 3. Click “arcsoft videoimpression” 4. Choose setup language.
35 5. Click “next” 6. Click ”yes” 7. Click “next”.
36 8. Click “next” 9. Click “finish” note: to find out more about videoimprssion or how to use it, consult online help by clicking ” ? “ icon on the top menu bar or website www.Acrosoft.Com.
37 connecting to pc window me/ 2000/ xp- no driver required: 1. Power on the camera first. 2. Plug the usb cable to the camera and computer or notebook properly..
38 download pictures, videos 1. Power on the camera first and plug in usb cable 2. For windows 2000/ me: double click “my computer” icon on the windows desktop. For windows xp: select “open folder view files using windows explorer” and click “ok” 3. Double click on the dcim folder to open. 4. Double...
39 7. Appendix specifications image sensor cmos 2048 x 1536 pixels built-in memory 16mb flash memory external memory sd card memory slot lens specification f2.8, f=6.3mm lens focus fixed, 1.5m (4.9 ft) to infinity flash strobe auto, force on, flash off flash distance approx. 1.3m ~ 2.8m white balanc...
40 computer system requirement z windows 2000, me or xp z 266 mhz pentium or better z 32mb ram z 200mb available hard drive space z cd-rom or dvd drive z color monitor z available usb port.
41 icons & indicators sd card indicator shaking hand battery full auto white balance battery 2/3 sunny battery 1/3 cloudy battery empty tungsten still mode fluorescent video mode delete still resolution delete all video resolution burst auto flash protect force on print flash off slide show exposure...