Meicheng CV-57C User Manual - page 6
Other manuals for CV-57C:
User Manual
Manual is about: HDMI 1.3 over CAT5 Extender with IR Control Path
of
11
5
Front View — Receiving Unit CV-57C-RX
HDMI OUT:
Connect to a HDMI display with a HDMI M-M cable here.
EQ:
Adjust the 8-level equalization control knob to the received HDMI signals. 0 – 7 = strongest – weakest. It is
recommended to switch from 7 to 0 to find the optimal visual experience.
IR EXTENDER:
Extendable infrared reception socket for plugging in the extension cable of IR receiver.
Rear Panel — Receiving Unit CV-57C-RX
TMDS:
Plug in a CAT-5/5e/6 cable that needs to be linked to the TMDS connector of the transmitting unit
CV-57C-TX.
DDC:
Plug in a CAT-5/5e/6 cable that needs to be linked to the DDC connector of the transmitting unit
CV-57C-TX.
+5V DC:
Connect to 5V DC power supply.
HDMI OUT
IR
EXTENDER
EQ
DDC
TMDS
+5V DC