Meicheng EX-G016 User Manual - Notice

Other manuals for EX-G016: User Manual

Manual is about: HDMI over Single CAT5 Distribution Series

Page of 23

Download

Print this page

Bookmark us

Notice

1. If the DVI or HDMI device requires the EDID information, please use EDID Reader/Writer to

retrieve and provide DVI/HDMI EDID information.

2. All HDMI over CAT5 transmission distances are measured using Belden 1583A CAT5e 125MHz

LAN cable and ASTRODESIGN Video Signal Generator VG-859C.

3. The transmission length is largely affected by the type of LAN cables, the type of HDMI sources,

and the type of HDMI display. The testing result shows solid LAN cables (usually in bulk cable

300m/1000ft form) can transmit a lot longer signals than stranded LAN cables (usually in patch

cord form). Shielded STP cables are better suit than unshielded UTP cables. A solid UTP CAT5e

cable shows longer transmission length than stranded STP CAT6 cable. For long extension users,

solid LAN cables are your only choice.

4. EIA/TIA-568-B termination (T568B) for LAN cables is recommended for better performance.

5. To reduce the interference among the unshielded twisted pairs of wires in LAN cable, you can use

shielded LAN cables to improve EMI problems, which is worsen in long transmission.

6. Because the quality of the LAN cables has the major effects in how long transmission distance will

be made and how good is the received display, the actual transmission length is subject to your

LAN cables. For resolution greater than 1080i or 1280x1024, a CAT6 cable is recommended.

7. If your HDMI display has multiple HDMI inputs, it is found that the first HDMI input [HDMI input #1]

generally can produce better transmission performance among all HDMI inputs.

Performance Guide for HDMI over LAN Cable Transmission

Performance rating

Type of LAN cable

Wiring

Shielding

CAT5

CAT5e

CAT6

Unshielded

(UTP)

Solid

Shielded (STP)

Unshielded

(UTP)

Stranded

Shielded (STP)

Termination

Please use EIA/TIA-568-B termination (T568B) at any time

Page 22 of 23

« ‹ Prev 17 18 19 20 21 22 23 Next › »

Summary of EX-G016

Page 1
Ex-g013a / ex-g013b ex-g015/ex-g017b / ex-g016 ex-g076a / ex-g076b hdmi over single cat5 distribution series user manual ex-g016 ex-g017a/ ex-g017b / ex-g015 ex-g013a ex-g013b ex-g076a ex-g076b page 1 of 23.
Page 2: Safety and Notice
Safety and notice the hdmi over single cat5 distribution series, including ex-g013a 1x2 hdmi over single cat5 distribution amplifier , ex-g017a 1x9 hdmi over single cat5 distribution amplifier, ex-g017b 1x9 hdmi over single cat5 distribution amplifier with 7.1ch audio , ex-g015 2x8 hdmi 1.3 over sin...
Page 3: Introduction
Introduction the hdmi over single cat5 distribution series provides the most flexible solution by which the high definition video and high quality audio can be transmitted to different locations over a long distance. The devices are cascadable, allowing you to extend hdmi/dvi compliant displays almo...
Page 4: Diagram 2
Diagram 2 ex-g076a cat5e cable up to 25m (80ft) up to 60m (200ft) ex-g017a/ ex-g017b hdtv#1 ex-g076b ex-g076b hdtv#2 hdmi cable cat5e cable hdmi cable cat5e cable ex-g076a hdtv#5 hdmi cable hdtv#6 hdmi cable ex-g076a ex-g076a hdtv#8 ex-g076b hdtv#7 ex-g076b cat5e cable hdmi cable hdtv#4 hdtv#3 hdmi ...
Page 5: Features
Features z state-of-the-art silicon image (founder of hdmi) chipset embedded for upmost compatibility and reliability z hdmi 1.2a compliant (ex-g015 & ex-g016 are hdmi 1.3c compliant) z hdcp compliant z regenerates the hdmi signal z supports audio output z supports default hdmi edid and has the abil...
Page 6
Technical specifications and package content model name ex-g013a ex-g013b technical 1x2 distribution amplifier role of usage transmitter [tx] transceiver [trx] hdmi compliance hdmi 1.2a hdcp compliance yes video bandwidth single-link 165mhz [4.95gbps] video support 480i / 480p / 720p / 1080i / 1080p...
Page 7
Model name ex-g017a / ex-g017b ex-g015 ex-g016 technical 1x9 distribution amplifier 2x8 matrix switch role of usage transmitter [tx] transceiver [trx] hdmi compliance hdmi 1.2a hdmi 1.3c hdcp compliance yes video bandwidth single-link 165mhz [4.95gbps] single-link 340mhz [10.2gbps] video support 480...
Page 8
Model name ex-g076a ex-g076b technical role of usage receiver [long range rx] receiver [short range rx] hdmi compliance hdmi 1.2a hdcp compliance yes video bandwidth single-link 165mhz [4.95gbps] video support 480i / 480p / 720p / 1080i / 1080p60 hdmi over lan cable transmission range full hd (1080p...
Page 9: Panel Descriptions
Panel descriptions ex-g013a 1x2 hdmi over single cat5 distribution amplifier 7 6 5 4 3 2 1 1. Power indicator 2. Dip switch [see table below] 3. Hdmi in: connect a hdmi source with a hdmi m-m cable here 4. Audio out: plug in a local speaker here 5. Hdmi out: connect to a hdmi display with a hdmi m-m...
Page 10: Ex-G013B
Note 1 if the hdtv shows video but without audio, please try to set audio mode to stereo. 2 factory default: pin#1-off [©], pin#2- off[©] for 1080p with stereo. 3 if you encounter any unsolved audio/video output problem during system installation, please turn to safe mode (pin#1-off [©] & pin#2-on[ª...
Page 11: Ex-G017A/b
Ex-g017a/b 1x9 hdmi over single cat5 distribution amplifier with 7.1ch audio 4 5 6 3 2 1 1. Power jack 5v dc 2. Hdmi input: connect a hdmi source here 3. Hdmi output: connect a local hdmi display here 4. Dip switch: see the definition below 5. Rotary controller: see the definition below 6. Out1-out8...
Page 12: Video Patterns
Video patterns the rotary controller on ex-g017a allows you to send several test patterns. Mode 0 (ex-g017a): stereo audio mode mode 0 (ex-g017b) : surround sound audio mode mode 1 (ex-g017a) : running circles mode 2: running circles with changing radius mode 1 (ex-g017b) : stereo audio mode mode 3 ...
Page 13
Mode 9 : pure red mode a : pure green mode b : pure blue mode c: pure black mode d : pure white mode e : write default edid mode f : save edid from the display connected to hdmi out note for edid (extended display identification data) learning 1. Don’t plug in hdmi cable to hdmi input connector whil...
Page 14: Dip Switch
Ex-g015 2x8 hdmi over single cat5 matrix switch 5 4 3 2 1 1. +5v dc: power jack for 5v4a dc 2. Hdmi in1: hdmi input1 for connecting to a hdmi source here 3. Hdmi in2: hdmi input2 for connecting to a hdmi source here 4. Edid: dip switch (see the definition in the next section) 5. Out1 – out8: rj-45 o...
Page 15: Ex-G016
Ex-g016 2x8 hdmi over single cat5 cascading distribution amplifier front panel 4 3 1 2 1. 1.2a/1.3a: output format led indicator [green: hdmi 1.3 / red: hdmi 1.2] 2. Format sel: push button for hdmi output format selection 3. In 1/in 2: input led indicator [green: hdmi input / red: rj-45 input] 4. I...
Page 16: Dip Switch
Dip switch pin#1 position off [©] on [ª] pin#2 position off [©] on [ª] edid mode use default edid use learned edid 1 audio mode 7.1 channel 2 stereo note 1 set pin#1-on [ª] first and then connect the hdmi input to hdmi display thru hdmi cable. Wait for 20 seconds. The recording procedure will be fin...
Page 17: Hardware Installation
Hardware installation ex-g013a extends hdmi signals to next cascading device with one local display 1. Switch off all devices, including monitors. 2. Connect a local hdmi display to the hdmi out of the ex-g013a and then connect a speaker to the 3.5mm audio socket. 3. Connect to a hdmi source (such a...
Page 18: Ex-G013B
Ex-g013b relays hdmi signals to next cascading device with one local display 1. Switch off all devices, including monitors. 2. Connect a local hdmi display to the hdmi out of the ex-g013b and then connect a speaker to the 3.5mm audio socket. 3. Connect to ex-g013b via rj-45 in by a cat5 cable. 4. Co...
Page 19: Ex-G017A / Ex-G017B
Ex-g017a / ex-g017b broadcasts hdmi signals to 8 remote displays and one local display 1. Switch off all devices, including monitors. 2. Connect a local hdmi display to the hdmi out of the ex-g017a or connect to ex-g013a for cascading. 3. Connect a hdmi source (such as a blu-ray disc player) to the ...
Page 20: Ex-G015
Ex-g015 broadcasts hdmi signals to 8 remote displays from either of two hdmi sources cat5 cable up to 25m (80ft) cat5 cable up to 60m (200ft) ex-g015 hdtv#1 ex-g076b ex-g076b hdtv#2 cat5 cable hdmi source #2 hdmi cable hdmi cable cat5 cable hdtv#4 hdmi cable ex-g076b hdmi cable hdmi cable ex-g076a e...
Page 21: Ex-G016
Ex-g016 broadcasts hdmi signals to 7 hdmi displays and cascade to another ex-g016 hdmi pin definition pin 1 tmds data2+ pin 8 tmds data0 shield pin 15 scl pin 2 tmds data2 shield pin 9 tmds data0– pin 16 sda pin 3 tmds data2– pin 10 tmds clock+ pin 17 ddc/cec ground pin 4 tmds data1+ pin 11 tmds clo...
Page 22: Notice
Notice 1. If the dvi or hdmi device requires the edid information, please use edid reader/writer to retrieve and provide dvi/hdmi edid information. 2. All hdmi over cat5 transmission distances are measured using belden 1583a cat5e 125mhz lan cable and astrodesign video signal generator vg-859c. 3. T...
Page 23: Limited Warranty
Limited warranty the seller warrants the hdmi over single cat5 distribution series to be free from defects in the material and workmanship for 1 year from the date of purchase from the seller or an authorized dealer. Should this product fail to be in good working order within 1 year warranty period,...